Roof lifting searchlight

Roof lifting searchlight

IIIRoof lifting searchlightUsing 2 LED floodlights, with a lighting distance of over 100 meters, considering both distance and distance

I. Overview

Vehicle mounted lighting is a type of nighttime emergency lifting and lowering lighting device with vehicle mounted positioning.

The device can be controlled in two ways: wired control and wireless remote control. This system has reliable performance

Advantages such as easy operation and reasonable design.

This device is suitable for emergency lighting at night, with positioning function, and can be installed in cars or fixed systems

On the fixed platform, it can also be equipped with a pan tilt zoom camera and wireless transmission monitoring equipment, located on the roof and

The car forms an integrated lifting system, with a novel appearance and stable functions.

It uses a multi throttle lifting rod to lift the lamp components to a height of 1.2 meters, 1.8 meters, 2.5 meters, 3 meters, 5 meters, and 4.5 meters, expanding the illumination range

Integrated configuration table: Long row lights (style and light source form optional), split car controller and speaker, car mobile lighting equipment, car display screen, red and blue flashing lights, wired and wireless controllers for car mobile lighting equipment, installation bracket, car display screen input software APP
One year warranty and lifetime maintenance for integrated car lighting display equipment products

2、 Main technical parameters

3、 Connection reference diagram

2.5-meter lighting system roof emergency lifting lighting system on-site monitoring video product parameters

The above picture is a reference picture. Please refer to the actual purchased product

Remote control instructions+control switch instructions

4、 Open box inspection

1. Open the box

1) Carefully open the packaging and remove all components; Install according to the instructions.

2) Check all possible transportation damages; If any damage occurs, please notify our company.

2. Packing List

1) 1 telescopic pole

2) 1 wireless controller

3) 1 wired control box

4) 1 set of lighting panel

5) 1 copy of user manual

6) 1 certificate of conformity

Note:

• When moving equipment, the lamp post should be moved, but do not pull the lamp or lamp post forcefully to prevent damage to the components of the lamp transmission box or lamp post;

• Place the device on a rigid support plane and ensure it can withstand a weight of 50KG;

• Do not attempt to power on the device before inspection, as it may pose a danger to your personal safety;

• Check that there are no magnetic substances involved within a 500mm radius around the equipment;

• 5、 Installation

• 1) Set the control box and lamp post in a fixed position to avoid insufficient cable distance.

• 2) Drill holes in the bottom of the car according to the size of the equipment lamp post (choose the installation method as needed).

  3) After removing the flange of the equipment lamp post, place the lamp post down from the installation hole on the bottom of the vehicle into the fixed upper and lower flange plates

  4) Linking and fixing the lamp post to the lighting surface can be done forward or backward.

  5) Connect the light pole cable to the control box plug and tighten the plug screws.

  6) The control box is powered on and connected to AC 220V for power supply.

  7) After power on, all functions of the device can be operated using both wireless remote control and wired controller.

Please consult us regarding online prices! Please consult us regarding online prices! Please consult us regarding online prices!