Rockmel pump R25/8 FL-Z-DB16-W-G3/4-R-P

Rockmel pump R25/8 FL-Z-DB16-W-G3/4-R-PAs a prerequisite for ensuring long service life and upper limit operational reliability, the conveying medium should have lubricity and be as clean and non corrosive as possible, but in any case, there should be no hard mixtures.

Typical conveying medium:

Waste oil (ATF oil)

Drilling lubricating oil

diesel

emulsion

gear oil

Fuel oil (hydraulic oil)

engine oil

Polyethylene glycol oil

Cutting oil (heavy oil)

Heat transfer medium oil

Deep drawing lubricating oil

RikmerPumps are mainly used in the fields of hydraulic and lubrication technology, or to transport various types of oil or other lubricating liquids. The specific fields of application include general mechanical construction, equipment installation machinery, construction machinery, mining industry, chemical industry, diesel engines, printers, electronic motor construction, automatic machinery, oil pipelines, gears, casting technology, logging, industrial gear transmission, refrigeration technology, compression technology, power generation, paper industry, industrial pumps, shipbuilding industry, textile industry, compressor industry, water pipes, grinders, tool production, wind energy field, and concrete construction industry.

Regular inspection and maintenance of RICKMEIER pump:

Monthly status check: Check the operating status at least once a month to observe for any abnormal vibrations, noise, or leaks; Monitor whether the temperature of the pump body, system pressure, and flow rate are normal [3].

Replacement of vulnerable parts: Regularly check the wear of seals (NBR/HNBR, etc.), oil seals, gears, and bearings, and replace them in a timely manner if they are severely worn (if the gears are severely worn, components need to be replaced, and bearings need to be supplemented or replaced with lubricating grease).

Key component maintenance: During disassembly and maintenance, it is necessary to recheck the fit clearance of each component (such as the axial clearance between the gear end face and the end cover), check whether there are cracks in the gear, and whether there are scratches on the shaft neck (roughness Ra ≤ 1.6 μ m); If there are obvious defects in the pump body and end cover, they need to be replaced or ground for repair (the contact area between the end cover and the pump body after grinding should not be less than 85%).

Rockmel pump R25/8 FL-Z-DB16-W-G3/4-R-PWhen purchasing and ordering, choose "Shanghai Weite Rui". The company supplies the full range of RICKMEIER pump products at reasonable prices and reliable delivery times, ensuring worry free delivery for you!

Rickmer pump model:

R25/20FL-M-G1-R-SO

R25/12.5 FL-Z-DB16-W-G1-R-SO

R25/16+25/26 FL-Z-W-G1+DB16-G1-R-SO

R25/5 FL-Z-DB16-W-G3/4-R

474276 R35/63/FL-Z-DB16-W-SAE2-R

R45/100 FL-Z-DB16-W-SAE2-L-P

RICKMEIER 泵 R25/12 5 FL-Z-DB-SO 44 1007 5019447 P 10/20 1687900-9

RICKMEIER 泵 R25/40 FL-M-G1-R-60 SN：333359-8

RICKMEIER 泵 R65/315FL-Z

RICKMEIER 齿轮泵 R45/125 FL-Z-W-SAE2.1/2-R

RICKMEIER 齿轮泵 R65/ 400FL-Z-W-SAE4-R

RICKMEIER 齿轮泵 R65/500FL-Z-W-SAE4-R

RICKMEIER R95/710FL-Z-W-DN132-R

RICKMEIER 齿轮泵 R35/63 FL-Z-DB16-W-SAE2-R

RICKMEIER 齿轮泵 R25/20 FL-Z-W-G1-R

RICKMEIER motor R35/31.5 FL-Z-SO 433984

RICKMEIER 泵 R35/40FL-Z-DB6-W-SAE1/2-R-SO

RICKMEIER motor R65/250 FL-Z-SO 439355

RICKMEIER motor R25/10 FL-Z-SO 427473

RICKMEIER 泵 R65/400FL-Z-W-SAE4-R part no：330032-4

RICKMEIER Pump R69/400 FL-Z-W-R Order Number 351475-9

RICKMEIER 齿轮泵 R45/125FL-Z-R

RICKMEIER R65/250FL-Z-W-SAE3-R part no：330030-8

RICKMEIER spare parts R35/63FL-Z-DBSO 420288