In stock RICKMEIER R35/50FL-Z-DB engine oil pump

In stock RICKMEIER R35/50FL-Z-DB engine oil pump

The standard R5 series external gear pump is a very economical solution for both collection and operation, suitable for a variety of applications. This type of pump has a simple and compact structure, and is easy to use and maintain. This series of pumps has good self-priming performance, and no liquid needs to be injected before each pump start. The lubrication of this type of pump is automatically achieved by the transported liquid, so there is no need to add lubricating fluid during daily operation. The use of elastic couplings to transmit power can compensate for minor deviations caused during installation. When subjected to inevitable hydraulic impact during pump operation, it can provide good buffering effect.

The standard version of the casing is made of gray cast iron, and the gearbox is made of quenched steel. Large sized, specially coated multi-component sliding bearings have high durability and good dry running characteristics, with a long service life. The shaft seal is designed as a standard configuration with radial shaft seals. Additionally, there may be various forms of sealing, such as mechanical seals.

Applicable media: hydraulic oil, gear oil, engine oil, cutting oil, heat transfer oil, heavy oil/fuel oil ATF、 Emulsions, waste oil, polyethylene glycol (PEG), poly (alpha olefin) (PAO), etc; The medium should be lubricating, clean, non corrosive, and free of hard particles.

RICKMEIER oil pumpApplication scenarios covering core industrial fields:

Industrial lubrication: lubrication systems for diesel/natural gas engines, transmissions, bearings, etc., to ensure the continuous operation of equipment;

Fluid transportation: efficient transmission of chemical hot oil, electric cutting oil, ship fuel oil, wind energy equipment lubricating oil and other media;

Special customization: Personalized fluid requirements for starch processing, printing machinery, rolling machines, and other scenarios can be quickly adapted through modular design.

Note:

In the following situations, it is not possible to exhaust the suction line:

-The suction pipeline leaks, so negative pressure will not be formed.

-When in vacuum or when the liquid level is far below the gear pump, it may cause the pressure in the suction side pipeline system or storage tank to be too low, resulting in the inability of the medium to flow in.

-A check valve (providing ventilation valve) is installed on the pressure side of the gear pump.

In stock RICKMEIER R35/50FL-Z-DB engine oil pumpThe quality of the factory's supply is guaranteed, and purchasing and ordering are done through legitimate channels. Shanghai Weite Rui Company has 22 years of sales experience in the European and American industrial products industry. The company has also established its own procurement companies in the United States and Germany. Weite Rui Company is committed to providing original and cost-effective supply for domestic large, medium, and small enterprises.

Stock RICKMEIER engine oil pump model:

RICKMEIER 齿轮泵 R35/63 FL-Z-DB6-W-SAE2-R

RICKMEIER 油泵 R25/10 FL-Z-W-G3/4-C

RICKMEIER 齿轮泵 R35/63 FL-Z-DB16-W-SAE2-R

RICKMEIER 齿轮泵 R25/20 FL-Z-W-G1-R

RICKMEIER motor R35/31.5 FL-Z-SO 433984

RICKMEIER spare parts R45/100FL-Z-DB-R 330226-2

RICKMEIER Gear Pump R45/80 FL-Z-DB 697014345

RICKMEIER spare parts R35/50FL-Z-DB-R 330223-9

RICKMEIER spare parts R35/25 FL-Z-DB 350503-9

RICKMEIER 润滑泵 R25/10FL-2-G3/4-W+25/6.3DB16-G3/4-R

RICKMEIER Gear Pump R65-315FL-Z

RICKMEIER 液压 R95/900 FL-Z-R 417199

Rekemel gear pump R35/50 FL-Z-W-SAE2-R

RICKMEIER oil pump R65/630 FL-Z-W-SAE4-R

R25/20 FL-Z-DB16-W-SAE1-R-P with fluororubber oil seal

R35/40 FL-Z-DB16-W-SAE1.1/2-R

R35/25FL-Z-DB16-W-SAE1.1/2-R-P with fluororubber oil seal

474276 R35/63/FL-Z-DB16-W-SAE2-R-P with fluororubber oil seal

R45/100 FL-Z-DB16-W-SAE2-L-P

R65/500 FL-Z-W-SAE4-L-P with fluororubber oil seal

R35/25 FL-Z-W-SAE1.1/2-R-P with fluororubber oil seal

R35/63/FL-Z-DB16-W-SAE2-R-P with fluororubber oil seal

R45/125FL-Z -R-SO

R46/160-FL-Z-W-SAE2.1/2-R

R46/125-FL-Z-W-SAE2.1/2-R

R46/160-FL-Z-W-SAE3-R

R46/180-FL-Z-W-SAE2.1/2-R