Rexroth tightening controller BS350 alarm fault explanation

Rexroth tightening controller BS350 alarm fault explanation

The alarm fault of Rexroth tightening controller BS350 may involve multiple situations

1Rexroth tightening controller BS350 alarm fault explanation

Error level 1

Description: Indicates that there is a serious error with the tightening gun and the tightening operation cannot be performed.

Possible reasons: lack of configuration, hardware component failure, etc.

Fault code 105

Fault message: The motor contactor cannot be opened.

Possible cause: There may be defects in the servo amplifier or the connecting wire used to tighten the shaft.

Fault codes 200 and 352

Fault message: Sensor system error.

Possible reasons: Defects in rotor electronic components, ErgoSpin, or connecting cables.

Fault code 524

Fault message: Tightening job log file error.

Possible reason: There are defects in the relevant components.

Temperature sensor malfunction

Performance: Tightening the controller may trigger temperature errors (such as LT hardware failure or long-term heavy load operation).

Possible cause: Damaged or poorly connected temperature sensor.

IIRexroth tightening controller BS350 alarm fault description: handling method

Check and replace hardware components

For alarms with error level 1, the configuration and hardware components of the tightening gun should be checked, and if necessary, damaged hardware components should be replaced.

Check and repair the connecting wires

For fault code 105, the connection wire between the servo amplifier and the tightening shaft should be checked. If there is any damage, it should be replaced in a timely manner.

Replace the sensor or connect the cable

For fault codes 200 and 352, the sensor and connecting cable should be checked. If there are defects, replace the sensor or connecting cable with a new one.

Confirm and fix log file errors

For fault code 524, the error should be confirmed in BS350 and the defective component should be replaced.

Cooling and Reset

For temperature sensor faults, the machine should first be shut down and the controller allowed to cool naturally by tightening, and then attempt software reset.

IIIRexroth tightening controller BS350 alarm prevention measures

Regular maintenance: Regularly maintain the tightening controller, including cleaning, inspecting, and replacing worn parts.

Pay attention to the working environment: Ensure that the tightening controller operates in a suitable working environment, avoiding excessively high or low temperatures, as well as unfavorable factors such as humidity and dust.

Correct use: Follow the operation manual and usage guide of the Rexroth tightening controller to ensure correct and safe use of the equipment.

Real time monitoring: Real time monitoring of the operation status of the tightening controller, timely detection and processing of alarm information.

In summary, the alarm fault of the Rexroth tightening controller BS350 may involve multiple situations and requires targeted handling based on specific alarm codes and fault information. At the same time, in order to prevent similar malfunctions from occurring, preventive measures such as regular maintenance, attention to the working environment, correct use of equipment, and real-time monitoring should also be taken.

Rexroth tightening controller BS350 alarm fault description: Shanghai Yangon Electronics Rexroth tightening controller common faults: No display when powered on, power light not on, overcurrent, overvoltage, undervoltage, overheating, overload, overspeed, phase loss, jitter, encoder abnormality, module damage, grounding fault, etc. The servo drive is free to inspect, and the repair price is quoted first. After confirmation by the user, repairs can be carried out. Adequate spare parts and fast delivery. All repaired servo drives undergo motor testing to ensure that all functions of the drives are intact. Quality assurance and reasonable repair prices.