Repair method for BS350 alarm 101 of automotive Rexroth tightening controller

Repair method for BS350 alarm 101 of automotive Rexroth tightening controller

Rexroth tightening controller BS350 alarm FC101 usually indicates temperature error (LT hardware failure or long-term heavy load operation). This means that a component of the tightening controller, such as a temperature sensor, motor, or related hardware, may malfunction due to overheating.

Car Rexroth Tightening Controller BS350 Alarm 101 Repair Method: Need to Investigate

1. Shutdown and cooling:

When the alarm FC101 occurs, the first thing to do is to immediately stop the machine and allow the controller to cool down naturally by tightening it.

Avoid continuing to operate in an overheated state to prevent further damage.

2. Check the temperature sensor:

Check if the temperature sensor is damaged or poorly connected.

Measure the resistance value of the temperature sensor with a multimeter to ensure it is within the normal range.

If the temperature sensor is damaged, a new sensor should be replaced.

3. Check the motor and hardware:

Check if the motor is overheated or if there are other malfunctions.

Observe the operation of the motor and listen for any abnormal noise.

Check if the hardware related to the motor (such as fans, heat sinks, etc.) is intact.

If the motor or hardware is damaged, new components should be replaced.

4. Check the power supply and cables:

Check if the power supply voltage of the tightening controller is stable.

Check whether the main cable and connecting cable are intact, without damage or poor connection.

If the cable is damaged, a new cable should be replaced.

Repair method for BS350 alarm 101 of automotive Rexroth tightening controllerAdjust the fastening time and cutting time

Replace servo amplifier

Check the function of the fan

Check the ambient temperature

Car Rexroth Tightening Controller BS350 Alarm 101 Maintenance Method: Shanghai Yangon Electronics Rexroth Tightening Controller Maintenance Common faults: No display when powered on, power light not on, overcurrent, overvoltage, undervoltage, overheating, overload, overspeed, phase loss, jitter, encoder abnormality, module damage, grounding fault, etc. The servo drive is free to inspect, and the repair price is quoted first. After confirmation by the user, repairs can be carried out. Adequate spare parts and fast delivery. All repaired servo drives undergo motor testing to ensure that all functions of the drives are intact. Quality assurance, maintenance at civilian prices.