Rapid viscosity analyzer 5280 model

Rapid viscosity analyzerFeatures:

Adopting an efficient heating and cooling system and a temperature sensor for direct temperature measurement in the sample bowl, the heating and cooling rates are precisely controllable, ensuring the repeatability and accuracy of the test

The special geometric shape of the blade ensures thorough and uniform mixing of the sample, without any starch particle precipitation

Short measurement time, simple and convenient operation

Adjustable speed of rotating sample bowl

High temperature control range

Rapid viscosity analyzerProduct Technical Parameters

1. Power supply: 220-230V, 50Hz;

2. Usage environment: Temperature: 10 ℃ -45 ℃; Relative humidity: 10-90%;

3. Comply with GB/T24852-2010, GB/T24853-2010, GB/T 22427.7-2023, built-in AACC No.61-02 rice pasting properties, AACC No. 76-21 wheat or rye flour, GB/T 24852-2010 rice and Rice noodles pasting properties determination, RVA milk cake powder quality analysis method, RVA cross-linking and substituted starch test method, RVA beer brewing accessories analysis method (enzyme addition and pH), RVA beer brewing accessories analysis method (including starch accessories), RVA rice starch quality test method wheat flour quality determination method, RVA wheat gluten quality test ethanol method, RVA wheat gluten viscosity determination method - There are at least 40 methods in total, such as RVA dry malt quality determination method by dilute acid method, RVA gelatinization analysis method commonly used by STD-1 and RVA gelatinization analysis method commonly used by STD-2;

★ 4. Use heating copper metal blocks for heating and have overheat protection function;

5. Automatically analyze: peak viscosity, attenuation, retention strength, rebound value, final viscosity, stirring value, gelatinization temperatureCorresponding viscosity;

★ 6. Up to 128 test program steps can be designed;

7. Sample dosage: 2-3 grams;

★ 8. Adopting program-controlled heating, the maximum speed can reach 15 ℃/min;

★ 9. Adopting program-controlled cooling with cooling water device, the maximum speed can reach 15 ℃/min;

10. Temperature accuracy: not exceeding ± 0.3 ℃ (under 25 ℃ conditions);

11. Temperature control range: 0~100 ℃;

12. Speed range: computer-controlled, adjustable within the range of 20~5000rpm;

13. Speed accuracy: ± 1% (160rpm);

14. Usage units: cP and RVU;

15. Viscosity range: 20~50000cP (80rpm); 10-25,000 cP（160rpm）;

16. Viscosity accuracy: The relative deviation between the average peak viscosity measured by two samples and the average value should be less than or equal to ± 3% (S2000 oil, 5000cP);

★ 17. Tower cap lifting control system: stepper motor controls lifting, lifting speed: 0-10mm/s;

18. Blade rotation control system: brushless motor control;

19. The calculation list includes peak gelatinization temperature, peak viscosity timecorrespond toViscosity, final viscosity, decay value, regeneration value, velocity area, temperature area, viscosity area, and set 20 sets of extended analysis results: speed to reach the target temperature, speed to reach the target time, speed to reach the target viscosity, speed to reach the peak viscosity, and speed to reach the target viscosityCorresponding viscosity speed, temperature to reach target speed, temperature to reach target time, temperature to reach target viscosity, temperature to reach peak viscosityThe corresponding viscosity time, viscosity at target speed, viscosity at target temperature, viscosity at target time, viscosity at the end of the test, peak viscosity within the time range, valley viscosity within the time range, and other results can be selected for addition, and each calculation item result is explained; ；

▲ 20. There are no highly harmful substances in the product ingredients, and the test results meet the REACH certification requirements. The solvents used in the production of the sealed product contain highly concerned harmful substances, including but not limited to mercury, polybrominated biphenyls (PBBs), and polybrominated diphenyl ethers (PBDEs), which should not exceed 0.1% of the mass percentage in the product;

21. The software comes with a knowledge base of physical properties, rheology, thermodynamics, electricity, etc., with no less than 100 sets of terminology analysis. The software can search for relevant knowledge analysis of physical properties at any time, and has at least 5 instructional videos and FAQ videos for operation;

22. The software comes with a standard testing method library, including GB, ICC, AACC, ISO, etc., which can be directly called by the software. The methods include specific sample names for testing, preparation methods before sample testing, test parameter settings, experimental curve graphs, and how to analyze results after testing;

23. The software comes with experimental reports, including experimental information, experimental parameters, experimental graphs, and experimental results. The experimental report can be exported with one click and cannot be edited, allowing for experimental traceability;

24. The curve has a playback function, and the color display and data display of the test curve can be selected according to needs;

25. The software interface provides six languages: Chinese, English, Western, French, Russian, and Japanese;

26. The software comes with 20 or more data algorithms, including but not limited to 3D Principal Component Analysis (PCA), LDA, PLSR, 3D SVM, etc. It can perform big data classification methods such as dimensionality reduction analysis and classification analysis;

27. The software has a copyright registration certificate;

28. Equipment result data and curves can be exported to EXCEL, PDF, and integrated into LIMS system;

Supporting equipment: 1 host; Consumables: 1 box (20 sets) of testing tanks and mixing blades; One branded computer (8GB memory, 512GB solid-state drive, 21 inch LCD display); 1 cooling cycle unit; One set of data analysis software.