- Phone
-
Address
No. 33 Gaojia Road, Niutang Town, Wujin District, Changzhou City, Jiangsu Province
Product Categories
Jiangsu Quanfeng Environmental Protection Technology Co., Ltd
RB-91D-3 tank negative pressure vacuum suction vortex fan
NegotiableUpdate on 05/06
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
After the RB-91D-3 tank negative pressure vacuum suction vortex fan $r $n $r $n is powered on, the fan rotates. Due to the groove design of the impeller, it drives air flow, so air enters the pump body through the inlet and stirs inside. Each groove is pressurized by vortex, and the energy of the air flow is formed one by one, and is discharged from the pump body through the outlet for use.
Product Details
RB-91D-3 tank negative pressure vacuum suction vortex fan
The high-pressure blower is made of ADC12 die cast aluminum material, which has high dimensional accuracy, surface smoothness, as well as high strength and hardness. The high-pressure fan vortex pump is a dual-purpose pump that can be used for blowing and aeration, as well as direct air adsorption. In terms of its components, it uses a special blade design to design the external properties of the equipment. Using this method to design the equipment can not only increase the pressure and increase the air volume of the equipment, but also effectively reduce the noise and prolong the service life of the equipment. The vortex high-pressure fan is made of aluminum alloy material, which reduces the weight and achieves the goal of lightweighting. High pressure fans are also known as high-pressure blowers, blowers, fans, vortex fans, vortex fans, vortex blowers, air pumps, air pumps, vortex air pumps,
Although the form of the product is varied, SKF low-noise bearings are used at the front end of the product. The oil seal is made of fluororubber material, which is maintenance free, but it is basically the same with minor differences. When choosing, users can choose according to their actual usage requirements. High pressure fan vortex pump is a dual-purpose pump that can be used for blowing, aeration, and direct air adsorption. However, regardless of the type of equipment, it can achieve normal operation. High pressure or high suction can play its due role. Adopting a special blade design, its blades have high manufacturing efficiency, wear resistance, wind resistance, and long service life,
RB-91D-3 tank negative pressure vacuum suction vortex fanStrong motor operating efficiency, the body of the vortex air pump is cast separately from the motor casing;
2. Motor: TEFC IP55 F insulated motor. (According to European CE specifications);
3. Bearing: The vortex air pump adopts a sealed dustproof design between the impeller and the shaft, which can prevent dust from entering and prolong the service life;
4. Impeller: A specially modified impeller with reduced gap range between the impeller and the body, which can prevent dust blockage during operation. Unlike other similar products with multiple corners and large gap surfaces, which can easily cause blockage and lead to high-pressure vortex pump failure.
High-pressure air pump | vortex high-pressure air pumpPerformance characteristics:
1. * Type, noiseless: The motor runs directly, and by adding an integrated sound suppression device, the high noise of the high-pressure vortex air pump is improved, thus achieving the effect of *.
2. High reliability: When the usage situation changes, the vortex air pump can still operate safely. Apart from the impeller, the high-pressure vortex air pump has no other actions, so its high reliability is almost maintenance free. The vortex air pump has the following advantages due to the use of precision outer bearings with good heat dissipation: high compression ratio; The operating temperature of the bearing is low; Long service life of lubricating grease; No maintenance required.
3. Easy to install and fully equipped, the vortex air pump can be installed and used at any time for compressed air or vacuum pumping, and can also be installed in any horizontal or vertical direction.
When the impeller of the oil-free and pollution-free high-pressure vortex air pump rotates, it does not come into contact with any parts and is free of lubrication, thus ensuring no pollution.
After 17 years of professional manufacturing experience, Zui has designed precision machinery and carefully tested motors with standard instruments. All parts can meet Zui's high-quality requirements, using standard IP55 and F-class motors with high efficiency and minimal faults. There is a shaft seal test between the motor and the vortex air pump to prevent foreign objects from entering. At the same time, to ensure functional effectiveness, each high-pressure vortex air pump undergoes strict testing before leaving the factory.
6. Voltage: Universal voltage type, available at 50HZ/60HZ. Whether your product is exported to countries in Europe and America that use 60Hz and high voltage, or to countries and regions in the Middle East, Africa, etc. that use 50Hz voltage, the high-pressure vortex air pump can meet the requirements and has complete functions, so you have no worries!
|Vortex high-pressure gaspumpInstallation:
A. Installation site
The surrounding temperature and humidity should meet the following conditions:
Single phase -5~40 ℃ Three phase -10~40 ℃
Choose a place with good ventilation, less dust and moisture.
The vortex air pump is installed outdoors, please use a rain cover.
B. Installation method
|Vortex high-pressure air pumpIt can be installed from any angle and securely fixed to a horizontal and rigid foundation or base using screws. The standard weight is approximately three times or more that of a vortex air pump. Special attention should be paid to whether the base is uneven. If so, the machine of the high-pressure vortex air pump may deform when the screws are tightened! Shock absorbers can be installed to reduce noise. When the ventilation duct is not connected to the suction port, in order to prevent the inhalation of dangerous or foreign objects, please install a wire or filter. For users of various models of vortex air pumps, please first discuss with our company.
Similar Product Recommend
