Full wind high-pressure fan factory

After the all wind high-pressure fan factory is powered on, the fan rotates. Due to the groove design of the impeller, it drives the flow of air, so the air enters the pump body through the inlet and stirs inside. Each groove is pressurized in a vortex like manner, and the circulating pressure is increased one by one to form * airflow energy, which is discharged from the pump body through the outlet for use.

Full wind high-pressure fan factory

Strong motor operating efficiency, the body of the vortex air pump is cast separately from the motor casing;

2. Motor: TEFC IP55 F insulated motor. (According to European CE specifications);

3. Bearing: The vortex air pump adopts a sealed dustproof design between the impeller and the shaft, which can prevent dust from entering and prolong the service life;

4. Impeller: A specially modified impeller with reduced gap range between the impeller and the body, which can prevent dust blockage during operation. Unlike other similar products with multiple corners and large gap surfaces, which can easily cause blockage and lead to high-pressure vortex pump failure.

High-pressure air pump | vortex high-pressure air pumpPerformance characteristics:

1. * Type, noiseless: The motor runs directly, and by adding an integrated sound suppression device, the high noise of the high-pressure vortex air pump is improved, thus achieving the effect of *.

2. High reliability: When the usage situation changes, the vortex air pump can still operate safely. Apart from the impeller, the high-pressure vortex air pump has no other actions, so its high reliability is almost maintenance free. The vortex air pump has the following advantages due to the use of precision outer bearings with good heat dissipation: high compression ratio; The operating temperature of the bearing is low; Long service life of lubricating grease; No maintenance required.

3. Easy to install and fully equipped, the vortex air pump can be installed and used at any time for compressed air or vacuum pumping, and can also be installed in any horizontal or vertical direction.

When the impeller of the oil-free and pollution-free high-pressure vortex air pump rotates, it does not come into contact with any parts and is free of lubrication, thus ensuring no pollution.

After 17 years of professional manufacturing experience, Zui has designed precision machinery and carefully tested motors with standard instruments. All parts can meet Zui's high-quality requirements, using standard IP55 and F-class motors with high efficiency and minimal faults. There is a shaft seal test between the motor and the vortex air pump to prevent foreign objects from entering. At the same time, to ensure functional effectiveness, each high-pressure vortex air pump undergoes strict testing before leaving the factory.

6. Voltage: Universal voltage type, available at 50HZ/60HZ. Whether your product is exported to countries in Europe and America that use 60Hz and high voltage, or to countries and regions in the Middle East, Africa, etc. that use 50Hz voltage, the high-pressure vortex air pump can meet the requirements and has complete functions, so you have no worries!

|Vortex high-pressure gaspumpInstallation:

A. Installation site

The surrounding temperature and humidity should meet the following conditions:

Single phase -5~40 ℃ Three phase -10~40 ℃

Choose a place with good ventilation, less dust and moisture.

The vortex air pump is installed outdoors, please use a rain cover.

B. Installation method

|Vortex high-pressure air pumpIt can be installed from any angle and securely fixed to a horizontal and rigid foundation or base using screws. The standard weight is approximately three times or more that of a vortex air pump. Special attention should be paid to whether the base is uneven. If so, the machine of the high-pressure vortex air pump may deform when the screws are tightened! Shock absorbers can be installed to reduce noise. When the ventilation duct is not connected to the suction port, in order to prevent the inhalation of dangerous or foreign objects, please install a wire or filter. For users of various models of vortex air pumps, please first discuss with our company.