^{LRB-94S-3 high-power vacuum feeding high-pressure vortex fan}

Wear resistant industrial vortex high-pressure fanVacuum conveying material single blade high-pressure blowerStructure description:

1. Special blade design, high pressure, large air volume, low noise, long service life;
2. High stability of air volume control and easy operation;
3. Complete range of styles and types;
4. Easy to install, can be installed in any horizontal or vertical direction;
5. Low noise, both the inlet and outlet of the fan are equipped with high-efficiency built-in soundproof pipes;
6. Low maintenance, bearings, low mechanical wear, * no need for replacement;
7. High temperature resistance, external bearing design, capable of withstanding high operating temperatures;
8. Low vibration, special shock-absorbing foot design, greatly reducing the vibration generated during the operation of the fan;
9. Widely applicable, with multiple product specifications, divided into high pressure and high air volume series, which can be flexibly selected;
10. Universal, all products are certified and use wide voltage dual frequency motors;
11. Strong insulation performance, easy installation, high reliability, high compression ratio, low bearing operating temperature, oil-free and pollution-free, easy maintenance, beautiful appearance, high quality;
12. The generation of high pressure and high suction is due to the design of the impeller. The impeller edge of the vortex air pump has multiple blades. When the impeller rotates, due to centrifugal effect, the air in the two blades is quickly moved towards the outer edge direction, transferring energy. The wind pressure is quickly superimposed, forming high pressure or high force, and its speed is increased. When the air is reintroduced into the impeller by the air duct, it will be accelerated again. Due to the transmission of energy by multiple blades, wind pressure is rapidly superimposed, forming high pressure or high suction!

Circular high-pressure fanWorking Principle:

High pressure blower is a dual-purpose blower with special blade design, featuring high pressure, large air volume, low noise, and high temperature resistance. The blower has strong insulation performance, easy installation, and high stability. The gas passing through is oil-free and dry. The generation of high pressure and high suction is due to the design of the impeller. The impeller edge of a high-pressure blower has multiple blades. When the impeller rotates, due to centrifugal force, the air in the two blades is quickly moved towards the outer edge, transferring energy and causing the wind pressure to quickly stack, resulting in high pressure or force and an increase in speed. When the air is reintroduced into the impeller by the air duct, it will be accelerated again. Due to the transfer of energy by multiple blades, wind pressure is rapidly superimposed, resulting in high pressure or high suction.

380V vortex air pumpInstallation
1. Flat washers and spring washers must be used to tighten screws;
2. Can use rubber buffer to withstand the weight of high-pressure fans, especially high-power high-pressure fans, *;
3. For certain occasions where noise is required, noise reduction * can be installed to reduce noise (usually around 5dB), and the noise reduction * can be installed at the end of the inlet or outlet duct;
4. For certain occasions with high noise requirements, a layer of soundproofing foam can be added according to the conditions of the machine itself to meet the on-site noise requirements. For specific details, please consult the fan manufacturer or a professional noise control company;
5. When using sound-absorbing foam, pay attention to the distance between the vortex fan and the box, and pay attention to the ventilation fan of the fan.

Vortex high-pressure fanPrecautions for use

No matter which brand it isBoth require protection in two aspects: pressure and dust.

For pressure, a pressure relief valve is often used, which is an unloading valve. When the operating pressure of the high-pressure fan exceeds the set pressure of the pressure relief valve, the pressure relief valve will automatically open to release the excess pressure and protect the high-pressure fan.

For dust, filters are often used. It often uses filter cartridges with different filtration accuracies according to different usage scenarios. Different filter cartridges have different maintenance methods and service lives, which need to be clarified when ordering.

In some special occasions, special protection is also necessary: for example, when using in a sealed environment, attention should be paid to ventilation and heat dissipation; When the ambient temperature (intake temperature is relatively high), it is more important to pay attention to ventilation and heat dissipation, or choose a high-pressure fan that allows for a higher intake temperature (such as a Funnel ring blower that allows for an intake temperature of up to 130 ° C);

For certain brands of high-pressure fans, there may be their own usage recommendations. Before purchasing, it is important to have a detailed understanding.

LRB-94S-3 high-power vacuum feeding high-pressure vortex fanApplication case for air supply
Printing forced drying - allows the printed color to dry quickly.
Oxygen supply for aquaculture ponds - used for oxygen supply in water.
The air cushion of the paper cutter increases buoyancy and is easy to move.
Punching machine --------------------------------------------------------------.
Car washing and drying - blow dry the water from the car washing machine after washing.
Incinerator - Combustion assistance of air and discharge of exhaust gases.
Powder particle transportation - air transportation of raw materials such as powder particles.
Wash and blow dry - the water or oil vapor after washing quickly separates from the item.
Paper and cloth strip blowing - automatic collection of debris after cutting edges of plastic, cloth, paper, etc.
Smoke blowing and suction allows the dispersed smoke to be quickly expelled. To avoid causing pollution.
Bottle washing machine blow drying - After washing empty beverage bottles with water, blow dry the water droplets, suitable for the food industry.
Drying air knife - Electronic circuit boards can be blown away with small dust and water droplets using a blower.
Gas heavy oil injection combustion - high air pressure (2000mmAq) and sufficient air volume will reduce your dependence on air compressors.
Livestock manure fermentation waterfall gas - blowing high-pressure air into the livestock manure tank to increase the contact area between livestock manure and air. It is also too polluting for sewage treatment.
Electrolyte stirring - using air to stir the electrolytic cell, allowing the electrolyte to circulate and quickly and uniformly electroplating the attached water bubbles. (4mm is preferred for the outlet hole)

Application case for air suction

Powder conveying - Granular objects, such as plastic raw materials, can be transported using air pressure (blowing) or vacuum suction.
Welding exhaust gas absorption - The smoke and dust generated during welding can be evacuated to other places in a vacuum manner to ensure the health of the operator.
Photographic plate making uses vacuum suction to keep the film flat, suitable for the photographic plate making industry.
Industrial vacuum cleaner - There are often residual hair chips on the machine in the factory, which can be cleaned in the way shown in the picture.
Local removal of dust and toxic gas generated in tunnels and narrow construction sites.
Weaving machine absorbs moisture and fixes thread ends, improving product quality and efficiency.
Vacuum dewatering - pulp dewatering, sludge dewatering, fabric dewatering, etc.
Tofu machinery attracts soybeans and transports them to the washing tank for cleaning and use.
Steel plate printing machine suction - using suction pressure to fix and facilitate printing operations.
Processing material retention - used for fixing non-magnetic objects such as wooden boards and plastics.
Printing suction - Vacuum suction printing or tissue forming transfer.
Gas decomposition - used for the suction of gas decomposition equipment.
Blanching machine -----------------------------------------------------------------.
Milk paper filling machine - vacuum suction utilization for filling milk boxes.
Book making machine --------------------------------------------------------------.
Residual fabric processing - cutting of fabric.