- Phone
-
Address
1326 Liantou Plaza, Dongfang Avenue, Songgang, Bao'an District, Shenzhen
Product Categories
Shenzhen Saiyataike Instrument Equipment Co., Ltd
QbD1200+laboratory TOC analyzer
NegotiableUpdate on 05/06
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
QbD1200+Laboratory TOC Analyzer is a laboratory TOC analyzer that uses UV lamp and persulfate oxidation method. It is designed for low concentration samples and has a range of 0-100 ppm. This TOC detector is suitable for industries with low sample concentrations such as pharmaceuticals, power, disease control, and tap water. This TOC analyzer has the advantages of high repeatability, accurate measurement results, simple operation and easy maintenance, and low usage cost. It solves the industry pain points of poor repeatability, high usage cost, and complex maintenance in low concentration TOC measurement, and complies with relevant pharmacopoeias and regulations.
Product Details
QbD1200+laboratory TOC analyzer
-Instrument features:
-
High repeatability
QbD1200+TOC detector can reduce interference between different sample measurements
The measurement results of QbD1200+TOC analyzer are consistent and have good repeatability
-
Accurate measurement results
QbD1200+online TOC detector can support continuous monitoring of multiple different sensors
The QbD1200+TOC analyzer has reports for both self check upon startup and on-demand diagnosis
QbD1200+TOC analyzer also has over range recovery function
-
Easy to operate and maintain
The QbD1200+TOC detector adopts a 10.4-inch color touch screen, with a more intuitive user interface
The QbD1200+TOC analyzer features a guided software interface for easy operation
The QbD1200+TOC detector comes with an automatic adjustment of measurement range/dilution function, which allows for measurement even without prior knowledge of sample concentration
QbD1200+laboratory TOC analyzer only requires one reagent to complete the corresponding measurement and analysis (self prepared or purchased from Hash)
The QbD1200+online TOC detector supports simple and convenient paperless functions, and can export data to network shared directories managed by Windows security policies
-
Low cost of use
The reagent cost of QbD1200+TOC detector is low
No need for frequent maintenance, only once a year is required
No need to equip a separate computer
-
Quick calibration saves time
Calibration only takes 2 hours
The TOC detector is equipped with automatic system adaptability testing for USP and EP, as well as SDBS verification program for JP
-
Follow pharmacopoeia and regulations
The QbD1200+laboratory TOC analyzer complies with major pharmacopoeia regulations worldwide, including USP, JP, EP, IP, KP, and ICH
The simplified IQ/OQ/PQ certification procedure for QbD1200+TOC detector complies with ICH guidelines
The QbD1200+TOC analyzer adopts a simple automation process and can be applied in the following fields:
-USP/EP SST Bulk Water
-USP SST sterile water
-JP SDBS verification
-KHP calibration in accordance with JP standards
-Target customer group:
The QbD1200+TOC analyzer is mainly aimed at pharmaceutical companies' QC laboratories, drug research and development, drug testing institutes, power plants, CDC laboratories, third-party testing institutions, universities, and research institutes
-Application areas:
The QbD1200+TOC detector can be widely used in industries such as pharmaceuticals, electricity, disease control, and tap water, meeting the strict requirements of the industry for water quality monitoring.
| technical indicators | |
|---|---|
| Performance Specifications | |
| measurement range | 0 ~ 100 ppm |
| precision | <2% or 3ppb (whichever is greater) |
| accuracy | ± 3% |
| calibration cycle | approximately 2 hours |
| analysis time | The fastest time is about 4 and a half minutes |
| Inorganic carbon treatment | |
| Do high content inorganic carbon samples require additional inorganic carbon elimination modules? | No |
| Is dynamic endpoint detection used to ensure complete removal of inorganic carbon? | is |
| The system's self diagnostic function ensures the integrity of data | |
| Will the instrument report TOC values if the following situations occur? | |
| The intensity of the ultraviolet lamp is too low | No |
| Insufficient carrier gas/empty storage tank | No |
| Insufficient reagents/bottle empty | No |
| Insufficient sample volume/small bottle empty | No |
| reagent | |
| Reagent supply | Purchase or self configure |
| Is there an option to prepare your own reagents | is |
| Total number of reagents (acid, oxidant, dilution water) | one |
| Measurement methods and guarantees | |
| oxidation | UV lamp+persulfate |
| Confirmation of UV lamp | Broadband silicate photodiode sensor |
| detector | Digital NDIR |
| Detector stability | Continuously verify according to the reference value |
| Detector moisture pre cleaning | Peltier cooler with continuous current monitoring |
| Distributor module | Using an injection pump, accurate to+/-1% of the volume |
| flow sensor | Dynamic fluid sensor (ensuring accuracy of sample and reagent volumes) |
| Selection of carrier gas | High purity air, oxygen or nitrogen |
| Confirmation of carrier gas pressure | Dual port pressure sensor |
| Closing of carrier gas valve | After the measurement is completed, the valve will close to avoid wasting gas |
| Automatic range function | have |
| Analysis mode | NPOC (Non Blowable Organic Carbon) |
| Data storage and retrieval | |
| Statutory authentication | 21 CFR， All measurement results in Part 11 are recorded in an encrypted database |
| Paperless report | Output report of network shared directory managed by Windows security policy through Ethernet |
| IO (Input/Output) | 3 USB ports, 1 Ethernet port |
| Data export format | PDF，CSV |
| user interface | |
| monitor | 10.4-inch high-resolution color touch screen |
| External PC | No external hardware required, embedded Windows 10 IoT Enterprise operating system |
| External keyboard/mouse | Optional, not mandatory |
| easy to operate | Intuitive user interface that guides operators through measurement settings for operation |
| Technical specifications | |
| calibration | Automated process: Perform 18 point calibration using KHP (5 concentrations, each repeated 3 times, 3 background) |
| Calibration solution | 5ppm C KHP (single 125ml bottle), diluted with reagents to concentrations of 1, 2, 3, 4, and 5ppm |
| Verification testing/system adaptability | Automated process: |
| USP SST Bulk Water Blank, 500ppb calculated as C: Sucrose, p-benzoquinone | |
| USP SST sterile water Blank, 8ppm as C: Sucrose, p-benzoquinone | |
| JP-16<2.59>verification Blank, 500 ppb calculated as C SDBS | |
| Compliance with regulations | |
| USP<643>(including sterile water SST), JP-16<2.59>, EP<2.2.44>, IP, CP, KP, US EPA 5310c | is |
| 21 CFR， 第11部分 | is |
| The ICH guidelines for instrument validation include: Accuracy, precision, detection limit, quantification limit, linearity, range, specificity, durability |
have |
| autosampler | |
| capacity | 64 sampling bottles (40mL glass vials TOC) |
| style | XYZ， Diaphragm perforation |
| Sample disk material | Aluminum anodizing |
| General technical data | |
| Instrument size | Width 320 x Depth 507 x Height 410 mm |
| power supply | 100-240 VAC，50/60 Hz，2A |
| weight | 14 kilograms (31 pounds) |
| Automatic sampler size | Width 366 x Depth 537 x Height 457mm |
| power supply | 100-240 VAC，47-63Hz |
| weight | 21 kilograms (45 pounds) |
| Working temperature and humidity | 5-35℃； Relative humidity up to 90%, non condensing |
| Unit used in the report | ug/L (ppb) |
| Order Information | |
|---|---|
| Item Number | description |
| analyzer | |
| 9880000 | QbD1200+laboratory TOC analyzer |
| 9890400 | AS-0640 automatic sampler (64 sample grades) |
| QbD1200+laboratory TOC analyzer&automatic sampler | |
| Accessory Information | |
|---|---|
| Item Number | description |
| Consumables and spare parts | |
| 9459400 | Concentrated reagents, QbD1200+ |
| 9459500 | 5 ppm C KHP calibration solution, 125ml |
| 9459600 | SDBS Verification Kit, 500 ppb C |
| 9459700 | USP System Applicability Kit (500 ppb) |
| 9459800 | USP System Applicability Kit (8 ppm) |
| 9459900 | Characteristic testing kit (1 ppm) |
| 9460000 | Stability testing kit |
| 9460100 | Verification Protocol Suite |
| 9891700 | Syringe replacement kit |
| 9890500 | Ozone processor replacement kit |
| 9898900 | Pipeline replacement kit |
| 9880200 | UV reactor replacement kit |
| 9890600 | Reagent bottle kit with customized bottle cap |
| 9898300 | QBD1200+power adapter |
| 9467200 | AS 0640 automatic sampler tray |
| 9454400 | AS 0640 Automatic Sample Injector No Flange Nut Expansion Tool |
| 9467400 | AS 0640 Automatic Sample Injector Needle Sleeve |
| SP6790 | AS 0640 automatic sampler diaphragm puncture probe |
| 2672700 | Sample bottle with diaphragm, 40 mL, TOC, 72 pieces |
| Hach Service Products | |
| SP-QLF1-QBD | QBD1200+Equipment Confirmation Service (IQ/OQ) |
| SP-COMF1-QBD | QBD1200+installation and debugging services |
Similar Product Recommend
