Q11-16x2500 mechanical shearing machine

NegotiableUpdate on 03/12

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Q11-16x2500 mechanical shearing machine

Product Details

Q11-16x2500 mechanical shearing machine

Source: Mechanical shearing machine http://www.sdtzgl.com/

Q11-16x2500 Mechanical Transmission Large Shear Machine Introduction:

The Q11-16x2500 mechanical shearing machine should be able to ensure the straightness and parallelism requirements of the sheared surface of the sheet metal after shearing, and minimize the distortion of the sheet metal as much as possible to obtain high-quality workpieces.

The upper blade of the Q11-16x2500 mechanical shearing machine is fixed on the tool holder, and the lower blade is fixed on the worktable. There are support balls installed on the workbench to prevent scratches when the sheet metal slides on it. The rear stopper is used for sheet metal positioning, and the position is adjusted by the motor. The pressing cylinder is used to press the sheet metal tightly to prevent it from moving during shearing. Guardrails are safety devices to prevent work-related accidents from occurring. The return journey usually relies on nitrogen gas, which is fast and has minimal impact.

The Q11-16x2500 mechanical shearing machine adopts a fully welded steel structure, with fast operation speed, easy maintenance, simple operation, simple structure, beautiful and elegant appearance, and low energy consumption.

Q11-16x2500 has strong production and processing equipment, gathers elite design talents, gathers a high-quality and high-tech workforce, integrates domestic advanced production technology, improves product quality inspection and monitoring system, and has been committed to research, innovation, and development of shearing machines, bending machines, and other equipment.

Main technical parameters of Q11-16x2500 mechanical shearing machine: (for reference only)

Product Name		unit	Mechanical shearing Machine
Model specifications			Q11-16x2500 mechanical shearing machine
Can cut very thick boards		Mm	16
Can cut a large board width		Mm	2500
Sheet strength		Mpa	≤500
Throat depth		Mm	250
Shear angle			3°
Number of cuts allowed		Min	11
Number of trips		Min	30
Flywheel speed 5		r/min	970
Material pressure		Kn	30
Distance between columns		Mm	2540
The rear material has a large distance		Mm	460
Blade length		Mm	2540
The distance between the workbench and the ground		Mm	680
Electric motor	model		Y200L-6
	power	Kw	22
	rotational speed	r/min	970
External dimensions	long	Mm	3595
	wide	Mm	2160
	tall	Mm	2440
Machine weight		Kg	13800

Q11-16x2500 mechanical shearing machineMethods of maintenance and upkeep:

1. Strictly follow the operating procedures for operation.

2. Before each startup, add lubricating oil according to the lubrication chart requirements at regular, fixed, and quantitative intervals. The oil should be clean and free of sediment.

3. The Q11-16x2500 mechanical shearing machine must be kept clean regularly, and the unpainted parts must be treated with rust proof grease.

4. The lubricating oil in the motor bearings should be regularly replaced and refilled, and the electrical components should be checked regularly to ensure that they are working properly, safely, and reliably.

5. Regularly check whether the V-belt, handle, knob, and button are damaged. If they are severely worn, they should be replaced in a timely manner and spare parts should be reported for supplementation.

6. Regularly inspect and repair the switch, fuse, and handle of the Q11-16x2500 mechanical shearing machine to ensure its reliable operation.

7. Oil, lubricate, and clean the machine tool 10 minutes before leaving work every day.

8. It is strictly prohibited for non designated personnel to operate the equipment, and it is necessary to stop the machine when people leave.