Public place environmental detection system box

PED-I型Environmental testing box for public placesCharacteristics and Applications:

1:It is for environmental monitoring,Measuring instruments developed and configured by the health and epidemic prevention department. This instrument can quickly and accurately measure the concentration of carbon monoxide in public places such as hotels, dance halls, shopping malls, theaters, train carriages, cabins, and rest halls,Carbon dioxide concentration,temperature,humidity,wind speed,Simultaneous detection of noise.

2:This instrument is a portable device,All use battery operation,Convenient for monitoring personnel to use without AC power

3:PED-I 型LCD display of public place detection system,Digital direct reading concentration

4:Equipped with an aluminum alloy portable case,Convenient for staff to carry

5:Users can also choose according to their needs, such as:ray,Formaldehyde and other instruments.

Public place detection system box, public place detection box, detection system box, carbon monoxide detector, carbon monoxide analyzer, carbon dioxide detector. Sound level meter, illuminance meter, anemometer, public place detection system box, public place detection box, detection system box, carbon monoxide detector, carbon monoxide analyzer, carbon dioxide detector. Sound level meter, illuminance meter, anemometer,

PED-I type public place detection systemTarget audience

Currently, the staff of China's health and epidemic prevention stations and environmental monitoring stations are affected by the special nature of measurement services. It is necessary to go to the measurement site to quickly and accurately measure the environmental conditions and the content of pollutants in the air. In the past, due to outdated instruments, it was often necessary to go to the measurement site for sampling and then return to the laboratory for analysis, which brought a lot of workload.

Now, the public place detection system box produced by our factory integrates good instruments produced by foreign countries and our company according to user needs, and combines them into a set of good detection boxes, allowing staff to go out of the laboratory and directly measure the required data on site, increasing the directness and strength of evidence for * personnel.

PED-I型Public Place Environmental Monitoring SystemboxIt is specially designed for conducting on-site testing work, and all instruments (some of which are imported) are concentrated in one suitcase for easy use and carrying.PED-IThe public environment detection box is specifically designed for the needs of public health environment detection, achieving instrument integration for precise measurement and analysis of environmental parameters. It can meet a wide range of environmental parameter measurement requirements and can accurately measure and analyze various parameters in the public health environment. It is a practical tool for environmental testing, health supervision and other departments to conduct inspections in public places.

Measurement parameters include: measurement of environmental gas concentration, noise, sunlight, air volume parameters, water quality, radiation, indoor pollution, etc.

PED-I型Public Place Environmental Monitoring SystemIncluding the following devices:

1TheCOdetector 2TheCO2detector

3、 Digital temperature and humidity meter 4、 Digital sound level meter

5、 Digital illuminance meter 6、 Digital Breeze Meter

7TheO2detector 8、 Magnetic field strength tester

PED-I型Public place environmental detection system boxTechnical Specifications

Precautions for use

1The operator must wear rubber insulated gloves and place a rubber insulated pad under the seat to prevent high-voltage electric shock;

2The instrument must be reliably grounded;

3When connecting the tested object,It is necessary to ensure that the high voltage output is0And in“reset”Status;

4during testing,The grounding terminal of the instrument should be reliably connected to the measured object, and an open circuit is strictly prohibited;

5Do not short-circuit the output ground wire with the AC power line to avoid high voltage on the casing, which may cause danger;

6Try to avoid short circuits between the high-voltage output terminal and the ground as much as possible to prevent accidents;

7Once the test lamp and leakage lamp are damaged, they must be replaced immediately to prevent misjudgment;

8When troubleshooting, the power must be cut off;

9When the instrument adjusts the high voltage without load, the leakage current indicates a starting current, which is normal and does not affect the testing accuracy;

10The instrument should be kept away from direct sunlight and should not be used or stored in a high-temperature, humid, and dusty environment;

11After one year of use, the instrument must be sent to the metrology department or returned to the factory for calibration in accordance with the requirements of the national technical supervision department. Only after passing the inspection can it continue to be used.

Zhili adheres to the enterprise management concept of "always honesty and always innovation", always regards the quality of testing equipment as its life, and has established a quality assurance system. Its products are widely used in industries such as power, metallurgy, railway, communication, and mining. The company has won praise from users around the world for its high-quality products, good corporate reputation, affordable product prices, and prompt and thoughtful after-sales service. High quality products and sincere and excellent services are our relentless pursuit.