Production type micro jet nano homogenizer liposomes

Technical parameters
1. The maximum processing pressure can reach 20000psi
2. The maximum flow rate is about 3.4 liters per minute
3. The maximum feed temperature can reach 75 ℃
4. Power Requirements: Three phase power supply, 380V, 15-50 horsepower
5. Compressed air requirements: pressure of 50-150psi, flow rate of 1SCFM at 50psi pressure, dew point temperature of 0-35 ℉
6. Hydraulic oil and cooling water for product heat exchangers are required
7. Machine size: 74cm * 180cm * 145cm
8. Weight: 800-1200Kg
Main features
1. Adopting withHigh wear resistanceThe interaction cavity has a fixed geometric shape, and after processing, uniform ultrafine particles or droplets can be obtained, generally below 100 nanometers.
2. Continuous or batch production mode.
3. The experimental results can be directly linearly scaled up to pilot and factory production.
4. Online cleaning, online detoxification.
5. The equipment structure is entirely made of stainless steel material.
　　
Instrument Introduction
　　M-7125-20Production type micro jet nano homogenizerThe equipment is a hydraulic type suitable for industrial production. The device uses a fixed shaped interactive chamber, which can generate high pressure up to 30000 psi through a booster pump, and is widely used in industries such as biomedicine and chemical engineering.
Produced by MFIC Corporation in the United StatesM-7125-20Production type micro jet nano homogenizerIt has been used in R&D and production by a large number of companies, and is suitable for nano dispersion and homogenization of microemulsions, nano emulsions, nano liposomes, albumin nanoparticles, nano dispersions, inhalants, nano suspensions, microcapsules, cell wall breaking and other biomedical industries, as well as chemical, cosmetics, food and other industries such as essence, pigments, microcrystalline cellulose, microbial microcapsules and so on.