Micro jet homogenizer for albumin nanoparticles

Technical parameters
1. The maximum processing pressure can reach 30000 psi
2. The maximum flow rate is about 1.6 liters per minute
3. The maximum feed temperature can reach 75 ℃
4. Power Requirements: Three phase power supply, 380V, 15-50 horsepower
5. Compressed air requirements: pressure of 50-150psi, flow rate of 1SCFM at 50psi pressure, dew point temperature of 0-35 ℉
6. Hydraulic oil and cooling water for product heat exchangers are required
7. Machine size: 74cm * 180cm * 145cm(Approximate value)
8. Weight: 675-900Kg (approximate)
Main features
1. By using an interactive cavity with high wear resistance and a fixed geometric shape, uniform ultrafine particles or droplets can be obtained after processing, generally below 100 nanometers.
2. Continuous or batch production mode.
3. The experimental results can be directly linearly scaled up to pilot and large-scale production.
4. Online cleaning and disinfection.
5. The equipment structure is made of stainless steel material.
　　
Instrument Introduction

　
　　M-7125-30Micro jet homogenizerIt is a hydraulic type equipment suitable for industrial production. The device application has an interactive cavity with a fixed geometric shape, which can generate high pressure up to 30000 psi through a booster pump, and is widely used in industries such as biomedicine and chemical engineering.

　
The Microfluidizer produced by MFIC Corporation in the United States has beenM-7125-30Micro jet homogenizerIt has been used in R&D and production by a large number of companies, and is suitable for nano dispersion and homogenization of microemulsions, nano emulsions, nano liposomes, albumin nanoparticles, nano dispersions, inhalants, nano suspensions, microcapsules, cell wall breaking and other biomedical industries, as well as chemical, cosmetics, food and other industries such as essence, pigments, microcrystalline cellulose, microbial microcapsules and so on.