Printing industry specific LED strobe light

PT-L01A portable stroboscopeBy using LED light beads, the flicker meter has almost no loss of the lamp tube during use, extending its service life. It is also equipped with high-performance lithium batteries, making it lighter in weight; No need for AC220V AC power supply, eliminating the trouble caused by power cords for operation. It can be carried by hand for observation, making it more convenient to use. One sufficient charge can meet the production requirements of a single shift, with a continuous working time of about 6 hours (the specific time depends on the frequency of flashing).

one、Product Features of PT-L01A：

1. Multiple triggering modes: internal triggering and external triggering. External triggering mode can achieve automatic tracking effect;

2. When triggered externally (using photoelectric signals), automatic tracking of patterns can be achieved;

3. Built in memory with flash frequency and automatic internal parameter memory function, providing convenience for next use;

4. Using imported encoders and streamlined operating software, knob adjustment is faster, more precise, and practical, making it easy and effortless to use;

5. The software has a strobe phase angle adjustment function;

6. The frequency units Hz and f/m can be selected, suitable for different usage scenarios;

7. Adopting imported high-power LEDs and built-in high-performance power modules to improve flash brightness and operational reliability;

8. The latest product has further stable performance, long usage time, and very few malfunctions;

9. The software has two tracking programs that can automatically track printed surfaces without fixed color codes;

10. New power supply design, powered by lithium batteries for greater durability;

11. High luminous efficiency and more uniform light.

IIPT-L01A Technical Parameters：

1. Working power supply: DC 12V 3A

2. Charger power supply: AC100V~240V 50~60Hz;

3. Display: 5-digit digital display;

4. Strobe accuracy: ± 0.1%;

5. Trigger frequency range: internal continuous adjustment from 50-36000 times/minute, with an adjustment accuracy of 0.1 times/minute;

6. Phase delay: With the provision of an external trigger source, the phase delay function can be adjusted from 0 to 359 degrees with an accuracy of 1 degree;

7. Strobe interval time: The adjustable flicker interval time is 8-100 microseconds (accurate to+/-1 microsecond); When the frequency is increased to 1/50 of the duty cycle, the internal software will limit the flicker time;

8. External trigger sensor types: photoelectric switch, Hall switch (PNP normally open), proximity switch (PNP normally open), encoder signal;

9. External trigger signal requirements: low level 0~0.7V, high level>2.7V (maximum allowable 24V), rising edge trigger, high level duration>20 us;

10. External trigger sensor power supply: DC12V 50mA (provided by the strobe); 11. Dimensions (length x width x height): 240mm x 120mm x 150mm.

11. Weight: Approximately 1.4kg.

If you want to learn more product information, please feel free to call our company for detailed consultation!