Prefabricated fire water tank and fire pump integration

Prefabricated fire water tank and fire pump integrationIntroduction

1. Space saving: The water pump and pump chamber are placed in the water tank and fixed on the module of the integrated pump station. Normally, it only occupies a water tank capacity of 0.5-1.5m.

2. Easy to move and disassemble, long service life: Due to the use of prefabricated stainless steel water tanks, the previous welding method has been changed, and screw assembly has strong applicability, easy installation, and no equipment required.

3. Due to the use of a new type of submersible fire pump, it can be directly submerged in water without the need for special air discharge. As long as the water tank level is within the specified level, it can directly enter the fire water supply state

4. Frost free cracking: The fire pump is hidden deep in the water tank and will not be burned out due to freezing in winter.

5. Low noise: Equipped with a water immersed motor and water pump, it greatly reduces the operating noise.

6. Reliability: Water immersed motors will not burn out the motor or corrode the motor bearings due to rain or environmental temperature.

7. Easy to upgrade: with interfaces to support remote transmission and automatic cleaning and disinfection.

Acceptance work after the installation of the integrated fire pump station with large module anti floating buried box pump:

1. The appearance inspection shows no rust or pollution.
2. If the box is filled with water for 24 hours and there is no obvious deformation, and there is no leakage or seepage at the weld seam, it is considered qualified

3. Provide various qualifications required for fire safety acceptance, and our company's fire safety qualifications can also be found on the China Fire Products Information Network.

Integrated large module anti floating buried box pumpRequirements for the installation process of fire pump station:

The material of SYSW large module fire water tank can be divided into hot-dip galvanized steel plate, stainless steel plate or composite plate according to customer needs.

The maintenance hole at the top of the fire pump station adopts a sliding rail maintenance hole, and the ventilation adopts a 24-hour non powered ventilation cap.

The internal structure and material of SYSW fire water tank are full scaffold structure or portal steel frame structure, and the structural form is steel structure.

The interior of the SYSW large module fire water tank is made of hot-dip galvanized steel pipes or composite plastic profiles;

The internal structure and material of the anti floating buried box pump integrated pump station pump room are portal steel frame structures;

The material should be hot-dip galvanized I-beams or composite reinforced I-beams of at least 14 gauge;

Use C15 concrete to make a cushion layer with a thickness of 150mm; cover the cushion layer with C30 impermeable reinforced concrete and level it. The size of the foundation shall not exceed 1000mm on each side compared to the size of the pump station. The thickness of impermeable reinforced concrete is 500mm.

Application areas of prefabricated fire water tanks:

1. Areas where the municipal water supply network cannot meet the water demand of users

2. The municipal water supply network can utilize areas with low water head

3. Areas with excessive pressure fluctuations in the municipal water supply network

4. Areas with frequent water outages

5. Areas where the diameter of the main pipe in the municipal water supply network is too small

6. The local water supply management department considers areas where stacked water supply equipment is not allowed to be used

Prefabricated fire water tank and fire pump integration