Pre furnace molten iron quality management instrument

DJ-TS4 typePre furnace molten iron quality management instrumentUsed for rapid determination of carbon equivalent (CE), carbon content (C%), silicon content (Si%), and manganese content (Mn%) of gray cast iron and ductile iron molten iron in front of the furnace; Predict the tensile strength of ordinary gray cast iron, etc. Non professionals can operate with simple training; There are multiple testing lines (i.e. material or product names, which users can add according to the actual situation of our company), and selecting appropriate testing lines for different grades of molten iron and the actual situation of each factory can make the testing results more accurate. The main functions are as follows:

1. Determination of carbon (C%), silicon (Si%), manganese (Mn%) and carbon equivalent (CE);

2. Predicting the tensile strength and hardness of gray cast iron;

3. Measure the tensile strength and hardness of gray cast iron after inoculation, and predict the inoculation effect;

4. After the composition determination is completed, the system automatically calculates the adjustment amount of the alloy based on the target values of carbon, silicon, and manganese content pre-set by the user;

6. Automatic saving of measurement results;

7. Can reproduce historical cooling curves and measurement results at any time;

8. Measurement data can be exported to EXCEL for easy data analysis, and can also be copied to an office computer through a USB interface for storage and analysis.

Featured features:

1. After the composition determination is completed, users can modify the target values of carbon, silicon, and manganese content according to the product requirements and recalculate the adjustment amount of the alloy, so that the adjusted iron composition can better meet the product requirements.

2. The determination of the tensile strength and hardness of gray cast iron after inoculation has higher accuracy.

Technical Specifications:

1. DJ-TS4 typePre furnace molten iron quality management instrumentmeasurement range

CE：2.50～4.80% ，C%：2.30～4.20%，Si%：0.60～3.80%，Mn%: 0.10~1.40%, Tensile strength: 100-400MPa.

2. Measurement accuracy

CE: ± 0.08%, C%: ± 0.05%, Si%: ± 0.10%, Mn%: ± 0.15%, tensile strength: ± 10MPa.

3. Analysis time

About 1 and a half minutes