Iron quality analyzer in front of the furnace (new)

NegotiableUpdate on 02/11

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The TG-5 furnace front molten iron quality analyzer (new) is the latest generation of furnace front molten iron quality management instrument with higher measurement accuracy and more stable use. The rapid thermal analysis technology before the cast iron furnace takes the solidification temperature curve of the cast iron microstructure formation process as the measured object, performs mathematical analysis on the solidification temperature curve, and obtains the characteristic points of the curve under different compositions. Based on a pre confirmed mathematical model, the rapid analysis technology for iron casting furnace can calculate the carbon equivalent (CE), carbon content (C%), silicon content (Si%) and other indicators of the molten iron. The measurement accuracy can reach CE 0.10, C 0.05%, Si 0.10%, which is suitable for iron casting production

Product Details

1、 Introduction

TG-5 Front Iron Quality Analyzer(New)It is the latest generation of furnace front iron quality management instrument with higher measurement accuracy and more stable use. The rapid thermal analysis technology before the cast iron furnace takes the solidification temperature curve of the cast iron microstructure formation process as the measured object, performs mathematical analysis on the solidification temperature curve, and obtains the characteristic points of the curve under different compositions. The rapid analysis technology for cast iron furnace front, which calculates the carbon equivalent (CE), carbon content (C%), silicon content (Si%) and other indicators of molten iron based on a pre confirmed mathematical model, can achieve measurement accuracy of CE 0.10, C 0.05%, Si 0.10%. It is a concise, fast and accurate instrument used in the production of cast iron furnace front. The detection time of the thermal analyzer is about 2-3 minutes, and the detection is completed within the waiting time of the molten iron. Then, the composition of the molten iron is adjusted according to the automatically calculated amount of carburizer, ferrosilicon, and scrap steel, and the appropriate composition of the molten iron is obtained before pouring.

2、 Main functional features

1. Detection of Carbon and Silicon Element Content

2. Detection of carbon equivalent

3. Determination of spheroidization rate and creep rate

4. Determination of tensile strength

5. Setting of target material

6. Automatically calculate the dosage of carbon additive, ferrosilicon, and scrap steel

7. Automatically draw curves of carbon silicon, carbon equivalent, primary crystallization temperature, and eutectic temperature changes,

8. Preservation and Reproduction of Data and Information

9. Determination of Initial Crystallization Temperature and Eutectic Temperature

3、 Detection range

K型（Nicr-Ni）200℃~1370℃

Carbon Equivalent (CE): 3.0-4.8

Carbon content (c%): 2.5-4.8

Silicon content (Si%): 0.5-3.5

If it exceeds the above range, there may be unstable detection accuracy or inability to perform detection.

TG-5 Front Iron Quality Analyzer(New)Imported temperature controller with an accuracy of 0.1 ℃ is used. Higher and more stable detection accuracy.