Powder flowability tester, compaction density meter, powder flowability measurement FT-102B automatic metal powder flowability tester (old model) 1. Overview FT-102B automatic powder flowability tester is a measurement and control technology that uses a control system to automatically test the powder flow time, reducing the testing errors caused by traditional manual blocking methods and stopwatch timing errors, making the test results closer to the actual values of the product itself, achieving better test results, and improving powder property analysis, product quality control, and proportioning, thereby reducing production costs. In addition to configuring the positioning angle, this product is also equipped with a level adjustment device to reduce the influence of external environment on the measurement results; The funnel and measuring cup both have positioning devices to ensure that the centers of the funnel and measuring cup are in a straight line; Also equipped with a height measuring ruler 2、 This product is widely used for material analysis and measurement in production, quality inspection institutes, research institutes, and college laboratories. 3、 This instrument is designed and produced in accordance with the GB 1482-2010-T standard for determining the flowability of metal powders using the funnel method (Hall flowmeter) instead of the GB1479-84 and GB1482-84 standard specifications. Its detection method and results are universal compared to internationally recognized detection methods. This product is also suitable for measuring the flowability and bulk density of similar powder materials. Suitable for determining the flowability of metal powders using the standard funnel method. Any powder that can freely flow through a standard funnel with an aperture of 2.5mm can use this device. 4、 Technical parameters: 1. Funnel (one outlet 2.5mm and one outlet 5.0mm) made of stainless steel or brass material, with sufficient wall thickness and hardness to prevent deformation and excessive wear. 2. The bracket, base, and receiving cylinder bracket are used to secure the funnel. The base is used for installing brackets and receiving measuring cylinders. Please adjust it horizontally, firmly, and without vibration. Adjust the height of the bracket and secure it with the included wrench, then install the funnel onto the bracket. The receiving cylinder (stainless steel plate) is placed on the base to collect powder. 3 . The balance (provided by the user) measures 100g with an accuracy of 0.05g. 4. The measuring cup is equipped with a stainless steel measuring cup with a capacity of 25ml. Users can refer to the provisions of the national standard GB 1479-84 to complete the determination of the loose density of metal powder (leakage method). 5. The instrument consists of an electrical part of the control box and a testing part, and automatically opens the discharge port timing. Stop timing after the sample flows out. Ruike Weiye Instrument Production Department reminds that there are also related products such as FT-102A vibrating funnel loose density tester and FT-100A vibrating density tester; FT-101 Scott Capacity Meter Loose Density Tester FT-102 Hall Current Meter/Loose Density Tester - Stainless Steel Material; FL4-1 Hall current meter/powder flowability tester - made of brass material; FT-102B powder flowability and density tester; FT-102BA microcomputer powder flow and density tester; FT-104BA powder particle flowability analyzer (multifunctional type); FT-104BC powder particle flowability analyzer (practical); FT-2000A Particle and Powder Characteristics Analyzer (Multi functional Type); FT-2000B Particle and Powder Characteristics Analyzer (Practical)
