- Phone
-
Address
Room 712, 7th Floor, Building 3, No. 4 Baotong Road, Wuzhong Economic Development Zone, Suzhou
Product Categories
Suzhou Pinen Instrument Technology Co., Ltd
Portable Cleanliness Extraction Equipment
NegotiableUpdate on 05/07
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The ACS-AE-P portable cleanliness extraction device is compact in size, easy to operate, and can be pushed to the workshop for testing when necessary.
Product Details
ACS-AE-PPortable Cleanliness Extraction EquipmentSuitable for customers with high detection frequency, pursuit of convenient operation, customized needs, and high requirements for experimental efficiency. The device is compact in size, easy to operate, and can be pushed to the workshop for testing when necessary.
1 ACS-AE-PPortable Cleanliness Extraction EquipmentFeatures:
1. The entire process involves the flow of liquid inside the pipeline, unaffected by external factors, with controllable environment and accurate test results.
2. Simultaneously considering both ultrasonic cleaning and pressure cleaning for cleanliness extraction, it can meet the requirements of different experimental methods for upstream customers.
3. Real time recycling and reuse of cleaning solution, not limited by the amount of cleaning solution.
4. The cleaning solution is automatically filtered before use, and compared to manual extraction, it does not require long preparation work before and after the experiment, and there is no risk of liquid contamination.
5. The device is compact in size, easy to operate, and can be pushed to the workshop for testing when necessary.
2、 Equipment Function Introduction:
1. Exhaust fan
Mainly used to discharge the mist generated by the evaporation of cleaning solution during sample cleaning.
2. LED lighting
Used to provide lighting inside the device.
3. Protective door
Used to prevent liquid splashing during the cleaning process from causing harm to the human body and to prevent air pollutants from entering the cleaning chamber.
4. Glove box
The glove box can effectively prevent secondary pollution caused by direct contact between hands and products, as well as damage to the skin caused by solvent based cleaning agents during operation.
5. Stop valve
If the filter membrane becomes clogged and a large amount of liquid remains in the cleaning tank, the liquid flow can be temporarily cut off by operating the stop valve in order to replace the filter membrane with a new one. After improving the filter membrane, please switch to the open state.
6. Liquid filter cartridge
Through reasonable fluid pipeline design, the experimental medium passes through a filtration system before entering the experimental process to ensure that impurities in the experimental medium do not enter the experimental process.
7. Filter membrane components
Used to place the experimental filter membrane, residual particles will be collected onto the filter membrane for analysis. Standard three-stage membrane filtration.
8. Light source switch
Switch the LED light source of the control device.
9. Exhaust air
Control the exhaust fan switch to promptly discharge the vaporized cleaning solution outdoors.
10. Power switch
Control the power on and off of the device.
11. Recycle button
Control the switch for liquid recovery, and collect the cleaned liquid in real-time into the built-in storage tank of the equipment. Recovery negative pressure -0.08mpa.
12. Cleaning button
After startup, the equipment cleans the product with the cleaning solution at the set pressure.
13. Traffic display
During the cleaning process, the accumulated flow rate will be displayed in real-time to control the amount of cleaning liquid. Unit: L.
14. Flow rate (pressure)/liquid level display
Used to display the flow rate (or pressure) of the cleaning solution during real-time cleaning, please refer to the equipment settings for specific settings. Additionally, real-time display of the percentage of liquid stored in the device's storage tank.
3、 Simple process for pressure cleaning:
1. Turn on the power switch.
2. Place the test sample in the cleaning tank.
3. Set cleaning parameters, such as flow rate of 2L/min.
4. Press the cleaning button, press the foot switch, and the liquid will be ejected from the nozzle according to the set pressure, starting the pressure cleaning of the product. The liquid will be filtered through a 0.22um filter cartridge before passing through the nozzle.
5. Press the recycle button, and after the cleaned liquid passes through the filter membrane, the particles are trapped on the filter membrane for analysis.
6. After passing through the filter membrane, the remaining liquid is filtered through a 10um filter element and automatically recovered into the storage tank, achieving the circulation of cleaning solution. Not limited by the amount of cleaning per cycle.
4、 Ultrasonic cleaning simple process:
1. Set cleaning parameters, adjustable power and cleaning time, such as frequency of 40kHz, power of 100W (converted by adjusting current display), cleaning for 60 seconds, and adding 5L of liquid.
2. Press the cleaning button, press the foot switch, and the device will automatically inject cleaning solution into the cleaning tank through the nozzle (the cleaning solution will be filtered through a 0.22um filter before entering the cleaning tank). After the cumulative flow reaches our set value of 5L liquid, release the foot switch. Turn on the ultrasonic cleaning switch to start ultrasonic cleaning.
3. After cleaning, press the recycle button to automatically recycle the liquid, and the particles will be retained on the filter membrane for analysis.
4. After passing through the filter membrane, the remaining liquid is filtered through 10um and automatically recovered to the storage tank for recycling.
5、 Equipment technical parameters:
6、 Equipment performance parameters:
| nozzle | 2.5mm cylindrical/fan-shaped/solid conical shape (standard three types) |
| Control method | foot switch |
| Cleaning tank size (W * D) | 420 * 320 * 200mm (or customized) |
| Cleaning tank material | Mirror stainless steel, conical bottom |
| protective gloves | Length 360mm, nitrile rubber |
| Cleaning flow rate | 1-5L/min adjustable or cleaning pressure 1-5 bar (internal switching) |
| Ultrasonic cleaning frequency | 40khz |
| Ultrasonic cleaning power | 300w ， Adjustable power |
| Cleaning and testing parts auxiliary accessories | stainless steel bracket |
6、 Equipment performance parameters:
| Configure LED lighting source | |
| Configure exhaust system to avoid the accumulation of cleaning solution atomization | |
| Configure a flow meter to record the accumulated flow during cleaning | |
| Filtration accuracy of cleaning solution | 0.22µm |
| Cleaning solution recovery and filtration | 10um |
| Suitable for detecting filter membranes | Ø 47mm (standard configuration with three-level filtering) |
| Stainless steel storage tank capacity | 20L |
| Main material | 304 stainless steel, industrial aluminum profile. |
| Overall dimensions (W * D * H) | 900*700*1450mm |
| working power supply | AC220V,50Hz |
| power | 1500W |
| noise | Less than 75db |
| Total weight approximately | 250KG |
