Polymer reinforced composite waterproof sheet lap joint impermeability meter

NegotiableUpdate on 01/19

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The GB/T26518-2023 polymer reinforced composite waterproof sheet lap joint impermeability meter has the following characteristics: 1. The machine is designed reasonably and easy to operate. 2. It uses a 7-inch touch screen with a simple layout and large button font, which is not easy to operate by mistake. 3. The high-precision pressure sensor data is accurate, with a minimum reading of 0.01Mpa. 4. The stainless steel ball valve is easy to open and close, with a longer service life compared to the needle valve and less likely to leak water. 5. The extended water tank has smooth drainage, and there is a water box inside the chassis for easy cleaning. 6. It adopts a silent water pump for pressurization, which has a longer service life than the air pump for lap joint testing. 7. It has an observation window for easy observation

Product Details

GB/T26518-2023Polymer reinforced composite waterproof sheet lap joint impermeability meter

ZDF-1Polymer reinforced composite waterproof sheet impermeability meter

1、 Overview:

This machine is mainly used to comply withGB/T 26518-2023The standard polymer reinforced composite waterproof sheet joint impermeability test uses a permeability meter to simulate the actual application structure and bonding state of polymer reinforced composite waterproof sheets, and test the water pressure penetration resistance of the joint part of the waterproof sheet. This instrument adopts an electric silent water pump for pressurization, which can be used by relevant departments such as scientific research, construction, production, design and teaching.

This instrument adopts an electric silent water pump with low pressure and noiseThe automatic control of pressurization, automatic maintenance of pressure, and digital timing of electrical appliances provide a very convenient equipment for the detection, testing, and research of impermeability. Under testing pressure not exceeding1MpaIn this case, this instrument can be used to measure the permeability or permeability of other materials.

2、 Technical parameters:

1Power supply:220V

2Test pressure control range:0-0.5Mpa（）

3Pressure gauge measurement: superior to2.5level

4Number of test pieces:1document

5Test piece size: Φ380mmCompared to Φ220mm

6Permeable observation port: center distance Φ50mm, distribution4*Φ6

Features of the machine:

1.The machine is designed to be reasonable and easy to operate,

2.use:7Inch touch screen, simple layout, large button font, not easy to operate by mistake

3.High precision pressure sensor, accurate data, minimum reading0.01Mpa

4.Stainless steel ball valve, easy to open and close,Compared to needle valves, needle valves have a longer service life and are less prone to water leakage

5.Extended sink, smooth drainage, and a water box inside the chassis for easy cleaning

6.Using a silent water pump for pressurization, for lap joint testing, it has a longer service life than the air pump

7.Equipped with observation windows for easy observation

GB/T26518-2023Polymer reinforced composite waterproof sheet lap joint impermeability meter

高分子增强复合防水片材搭接缝不透水仪