Pneumatic caliper disc brake

NegotiableUpdate on 05/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Pneumatic caliper disc brake note: When each friction plate wears 0.5mm, the braking torque decreases by 8% on the basis of the rated power, and the gap between the friction plate and the brake disc must be adjusted in a timely manner. Adjustment and replacement of friction plate clearance 4.1 When the clearance between the friction plate and the brake disc is greater than 4.5mm, adjust the friction plate clearance according to steps 3.13.23.73.83.9. When the thickness of the friction material of the friction plate reaches 4mm, the friction plate should be replaced in a timely manner. Tightening tool: wrench 30mm, tightening torque: 200mm 4.2.1 Follow steps 3.13.2, 4.2

Product Details

Pneumatic caliper disc brakePneumatic caliper disc brake

Wear resistant, high temperature resistant, easy to install brake pads for high-speed shafts of wind turbines. Introduction:FRK980Copper based powder metallurgy wind power brake pads are a friction material independently developed by our company, and their performance is similar to that of foreign Miba companyMD550Friction materials,FRK980It is a friction material made of copper powder as the matrix, special wear-resistant alloy particles as the friction component, and special sintering technology for coke brake. It is produced at high temperatures（700℃) has a stable friction coefficient, low wear, and minimal damage to the brake disc.

Easy to install and safe to use, it can meet the heavy-duty high-speed braking requirements of construction machinery such as wind turbines and high-speed trains.Currently, it is widely used both domestically and internationally. The following are the products and performance indicators produced by our company, which can also be processed according to the specifications and dimensions requested by customers. Test conditions and indicators of rotational inertia（KgM355Dual disk diameter（m）0.78Friction plate area（mmRotational speed（rpmLinear velocity（m/s）4260Brake pad pressure ratio（Mpa）22Energy consumption per unit area（J/mmcoefficient of friction0.25-0.40.15-0.3Wear amount（cm^3/GJ）340Previous post:SYFS-02ANext article: No more.

n1118Detailed ExplanationSYFS-02DSize:292mm*125mm*24mmFriction material:FRK980Surface treatment: Copper plating Application: Wind turbine brake Performance characteristics: stable friction coefficient, wear resistance, high temperature resistance, easy installation Brake pads for high-speed shafts of wind turbines Introduction:FRK980Copper based powder metallurgy wind power brake pads are a friction material independently developed by our company's Jiaozuo brake technicians. Their performance is similar to that of the foreign Miba companyMD550Friction materials.

FRK980It is a friction material made of copper powder as the matrix, special wear-resistant alloy particles as the friction component, and special sintering technology for coke brake. It is produced at high temperatures（700℃) has the characteristics of stable friction coefficient, low wear, minimal damage to brake discs, easy installation, and safe use, which can meet the heavy-duty high-speed braking requirements of construction machinery such as wind turbines and high-speed trains.Currently, it is widely used both domestically and internationally. The following are the products and performance indicators produced by our company, which can also be processed according to the specifications and dimensions requested by customers.