Hydraulic Failure Protection Brake

NegotiableUpdate on 06/10

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Hydraulic failure protection brake with point by point paired release function can reduce the impact on equipment during emergency braking. Jiaozuo brake electronic control can achieve various self-locking protection functions. Functions such as automatic braking, manual braking, system online interlocking and centralized control controlled by devices such as anemometers and speed sensors; It has single manual opening and manual braking functions, and is easy to operate; Each wheel brake is individually controlled by the system for easy monitoring and troubleshooting. Note: Point by point paired release: refers to multiple wheel side brakes on the same device being able to brake in batches according to the set braking point position and delay sequence.

Product Details

Hydraulic Failure Protection BrakeHydraulic Failure Protection Brake

The installation hole position and size should be accurate;b.When installing the brake base together with the brake, the base and brake should be fixed (welded or bolted) after the brake is accurately installed in place;c.If the installation holes on the brake mounting base have not been machined yet, the brake should be fixed after the brake is initially installed in place and the installation holes are drilled; The installation base and hole position of the brake base shall have a relative positional tolerance with respect to the brake disc (see figure), which shall not exceed the table1The regulations. picture2watch1Brake specification center heighth1K1K2The nominal tolerance of parallelism between the center offset base surface and the brake disc axis is nominal toleranceSaYP1-220~800230±1.580±0.5180±0.510.5YP±0.5130±0.51.20.8YP±0.8180±0.81.51.03.2Install the previous article:DLBZNext article: Advantages and disadvantages of electromagnetic brakes and electric hydraulic brakes for electronic mechanical wheel brakes\\nDLBZElectronic mechanical wheel brakeDLBZIntroduction to Electronic Mechanical Wheel Brake ProductsDLBZThe electronic mechanical wheel edge brake consists of a micro motor, a reduction transmission device, an electromagnetic retainer with one-way reverse and separation functions, a ball screw amplitude, a cam force increasing mechanism, a spring brake cylinder, a brake caliper, and an electronic control system.

The micro motor drives the ball screw amplitude compression spring to release the brake, and the electromagnetic retainer maintains an open state. The Jiaozuo brake controls the electromagnetic retainer to release the compression spring and brake the brake caliper. When working, the deceleration transmission device is driven by a micro motor to output thrust from the ball screw, and the coke brake cam force increasing mechanism is used to eliminate the force of the brake spring and open the brake caliper. After opening, the motor stops working and is reversed by the electromagnetic retainer reverse deceleration transmission device to maintain the open state. When braking, the electromagnetic retainer is energized to engage and disengage the retainer.

The deceleration transmission device reverses, and the compressed brake spring force causes the brake caliper to brake, producing a braking effect. The windproof device adopts an electronic mechanical drive mechanism, which can easily meet the various windproof working conditions requirements of the equipment by automating the control of the coke brake. It has0The windproof effect. Performance characteristics: small size, compact structure, easy installation, high protection level, long service life; The structure of using a micro motor to drive the ball screw amplitude as the driving device has a large braking force and accurate and rapid action.