Platinum rhodium thermocouple WRP-130

WRR-130 Platinum Rhodium Thermocouple

Product Introduction: Industrial assembled thermocouples are used as temperature sensors, usually paired with display instruments, recording instruments, and electronic regulators. It can directly measure the surface temperature of liquids, vapors, gases, and solids within the range of 0 ℃ to 1800 ℃ in various production processes.

According to national regulations, our factory has been producing platinum rhodium with IEC standard division numbers since 198730-Platinum rhodium6Platinum rhodium10-Platinum, nickel chromium nickel silicon, nickel chromium copper nickel, copper copper nickel, iron copper nickel and other types of thermocouples shall comply with JB/T3238-1999 standard.

Working principle: The working principle of a thermocouple is that two conductors with different compositions are welded at both ends to form a circuit. The direct temperature measuring end is called the measuring end, and the wiring terminal end is called the reference end. When there is a temperature difference between the measuring end and the reference end, a thermal current will be generated in the circuit. When connected to a display instrument, the instrument will indicate the corresponding temperature value of the thermoelectric potential generated by the thermocouple.

The thermoelectric potential of a thermocouple will increase as the temperature at the measuring end rises. The magnitude of the thermoelectric potential is only related to the material of the thermocouple conductor and the temperature difference between the two ends, and is independent of the length and diameter of the thermoelectric electrode.

Prefabricated thermocouples are mainly composed of a junction box, protective tube, insulating sleeve, terminal block, and thermoelectric electrode, and are equipped with various installation and fixing devices.

WRR-130 Platinum Rhodium Thermocouple

Product selection information:

Therefore, arc extinguishing is a consequence that must be dealt with by high-voltage circuit breakers. 3. High voltage circuit breaker (air switch), also known as air switch, can be used to connect and disconnect load circuits, and can also be used to control motors that do not start. Its function is equivalent to the sum of partial or complete functions of electrical appliances such as knife switches, overcurrent relays, voltage drop relays, thermal relays, and leakage protectors, and it is one of the main protective appliances.

The reporter learned that the project requires a risk assessment of cadmium contaminated site soil based on specific inquiries and visits to the site; The research on controlling the remediation of contaminated soil, especially the ecological toxicity, health hazards, and situational risks of toxic heavy metal cadmium, constitutes a set of feasible soil pollution remediation tasks, and is used to remediate cadmium contaminated sites. According to Yu Gang, director of the POPs Professional Association of the Society, the domestication of POPs will go through stages such as detection and analysis, risk assessment, emission, treatment, and remediation of contaminated sites. China once formed a preliminary foundation for POPs detection and analysis. Although the detection instruments mainly rely on foreign brands such as Waters, Agilent, Shimadzu, etc., a group of POPs testing laboratories established by authorities, universities, research institutes, enterprises, etc. have served the market at the end.

Flexible vehicle exhaust emissions are one of the main sources of air pollution affecting the city. Our district continues to intensify efforts to eliminate old flexible vehicles. In 2016, 51000 old flexible vehicles were replaced and 420000 were inspected. Remote sensing monitoring is another new measure taken by our region in the field of technological haze control. In 2016, the average annual concentration of PM2.5 in Chaoyang District was 75 micrograms per cubic meter, which was 9.6% higher than the same period last year. The number of excellent days increased by 11 days compared to 2015.

Compensation wire type
Splash proof type
Waterproof type
Handle type
Small junction box

According to their task principles, SPDs can be classified into voltage switch type, voltage limiting type, and combination type. ⑴ Voltage switch type SPD. When there is no instantaneous overvoltage, high impedance occurs. Once lightning instantaneous overvoltage is taken care of, its impedance suddenly changes to low impedance, allowing lightning current to pass through, also known as "short-circuit switch type SPD".

But regarding the leakage of buried underground pipelines, relying on the smell of air is often futile. In order to directly detect leaks, researchers from Colorado State University collaborated to equip street view vehicles with detectors. In a number of cities in the United States, the locations where gas leaks could be detected were marked on maps, and the consequences were published in last month's issue of Situation and.