This machine is suitable for preparing sample strips for tensile testing of biaxially oriented films (BOPP, BOPC, BOPET, BOPA), biaxially oriented films and their composite films (bags).
Main purpose:
This machine is suitable for biaxially oriented thin films（BOPP、BOPC、BOPET、BOPA）Preparation of test strips for tensile testing of uniaxial stretch films and their composite films (bags).
Compliant with standards:
conform toGB/T1040.3-2006/ISO527-3:1995Determination of Plastic Tensile Properties auxiliary word for ordinal numbers3Section: Sample Conditions for Thin Films and Sheets6.1.1The relevant regulations regarding spline size.
Main features:
The machine holds plastic film samples firmly, with sharp cutting tools that are easy to replace; Easy to operate, safe and reliable to use; Multiple layers, multiple or multiple splines can be cut at once; Quantity of samples that can be prepared at once12Article, among which15mmwide5Article10mmwide7Article; In addition, users can change the tool configuration as needed and cut simultaneously at once10mm、15mm、20mm、25mmFour types of splines.
Compared with the punching and cutting method, the cutting method of this machine produces samples with flat edges and parallel edges without defects on both sides20Under magnification, no defects are observed, and the cut spline ensures that the mechanical properties of the film are not affected. Its tensile strength and elongation at break data are accurate, reliable, and consistent.
Technical parameters:
Sample width:10mm×(6+1)strip、15mm×(4+1)Article;
Sample preparation error:≤±0.1mm；
Sample length:160mm；
Cutting thickness:≤0.25mm；
External dimensions:290mm(Long) ×230mm(Width) ×150mm(High);
Weight: Approximately15kg；
