Piezoelectric accelerometer XD10

NegotiableUpdate on 05/12

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The piezoelectric accelerometer XD10 consists of a triangular shear accelerometer, a charge converter, and an integral amplifier. Compared with the dynamic coil sensor, it has the advantages of small size, light weight, high reliability, wide frequency band, and can be installed in any direction. Especially, the displacement of the measurable vibration is much larger than that of the dynamic coil sensor, reaching about 10mm (depending on the sensitivity, the lower the sensitivity, the larger the displacement). It has a large output signal, good anti-interference performance, does not require an external power supply, and can be used in harsh environments such as smoke, oil and gas, and water and gas.

Product Details

Piezoelectric accelerometer XD10

Structure *, complete variety, stable performance, good environmental characteristics, long service life, easy installation. Can be produced with our companyCAA testing system consisting of a series of charge amplifiers and impedance converters is used for measuring various impact vibrations. The main application areas of the product are railway, bridge, construction, vehicle and vessel, machinery, water conservancy and power, petroleum, geology, environmental protection, earthquake monitoring and other departments.

Technical Specifications:

Sensitive PC/ms^-2：～400

^{Frequency band range Hz: 0.05-500}

^{Resonant frequency KHz: 2}

^{Range in milliseconds^-2±10%：0.0005～500}

^{Z-Large Lateral Sensitivity Ratio%: ≤ 5}

^{Internal structure: cutting}

^{Weight g: 150}

Purpose: Ultra low frequency

Piezoelectric accelerometer XD10

Based on the piezoelectric effect of piezoelectric crystals. When certain crystals are deformed by force in a certain direction, polarization phenomena occur inside them, and opposite sign charges are generated on their two surfaces; When the external force is removed and returns to a non charged state, this phenomenon is called the "piezoelectric effect", and crystals with the "piezoelectric effect" are called piezoelectric crystals. Commonly used piezoelectric crystals include quartz, piezoelectric ceramics, etc

Main technical parameters

1. Measurement display range: 0-9999 r/min; 0～19999 r/min; The V-type can reach a speed of 105/min and is used for measuring the speed of high-speed centrifugal machinery
2. Measurement accuracy: accuracy ± 1r/min
3 . Transmission output: 4-20mA (or 1-5V)
4. Distance between sensor and speedometer: less than 200 meters or less than 1000 meters
5. Power supply: AC220V ± 10%, 50-60Hz; power consumption: less than 6W; special power supply uses AC127V ± 5%, 50-60Hz
6. Operating environment: Temperature: 0-50 ℃; Relative humidity: ≤ 85%; Vibration coefficient ≤± 0.005URL/g

7. Load capacity: less than 500 ohms, special requirements can increase the load resistance