Personal protective bag

1Ecological environment law enforcementPersonal protective bagJN-GRFHB200According to the standard: "Guidelines for Standardization Construction of Comprehensive Administrative Law Enforcement Equipment for Ecological Environment Protection"(2020年版)》.

2、 Ecological environment law enforcementPersonal protective bagJN-GRFHB200configuration

According to the Guiding Standards for Standardization Construction of Comprehensive Administrative Law Enforcement Equipment for Ecological Environment Protection(2020年版)》Equipped withEcological environment law enforcementPersonal protective bagJN-GRFHB200Equipped with strong light flashlights, safety helmets, protection against toxic and harmful substances, radiation protection equipment, goggles, protective shoes, face shields, etc.

3、 Ecological environment law enforcementPersonal protective bagJN-GRFHB200Detailed features

1Strong light flashlight

1）Timely zoom system, wide angle for both near and far use/Fast switching of long-range mode;

2）Wide angle floodlighting;

3）Eagle eye focusing;

4）USBSegmented, electric quantity management system;

5）Size:127X28cm；

6）Six stage heat dissipation effectively ensures chip operation;

7）Gear: Strong light, power-saving, flashing, double-click extreme;

8）Battery life: Strong light3.5Hour;

9）Battery capacity:2300mAh；

10）Watt count:15W；

11）Range: Approximately200m；

12）Weight:160g；

13）Charging method:type-C USBFast charging.

2Safety helmet

1）Shelf life:30A month.

2）Lightweight and breathable, adjustable ventilation holes for heat dissipation;

3）Anti impactHDPEMaterial cap shell design, exceeding the requirements of national and European standards;

4）Adjustable shock-absorbing lining, ergonomic design, comfortable to wear;

5）Triple protection design:HDPEmaterialHStrong support for the frame and secondary reinforcement for top reinforcement protection;

6）Head circumference:51-62cm；

3Protection against toxic and harmful substances

1）Three piece hood and chin protection design, matched with facial mask;

2）Special seam treatment, with additional adhesive on top of the lock seam5The adhesive tape made of laminated chemical film enhances the strength of the joint and provides effective liquid and particle protection to the joint area.

3）Double layered placket zipper structure effectively blocks chemical liquids;

4）There is a thumb ring at the cuff to fix the position of the sleeve;

5）Advanced film technology, soft fabric with no noise during wearing and movement;

6）Seal the joint with transparent multi-layer extruded composite tape;

7）Adopting92gsmMade of thick and durable materials, the fabric is composed of an inner layer of anti-static non-woven fabric and an outer layer of composite film, which can provide a high level of liquid protection;

*8）CEProtection Category III Certification, Protection Category3/4/5/6.

4Radiation protection equipment

1）Sensor:GMCounting tube:

2）Measurement range:0.05MSv-50mSv；

3）Measurement accuracy:-17%-＋25%based on¹³⁷CSγ；

*4）Battery life20Tian (continuous measurement, without opening grain sounds);

*5）Charging interface:TYPE-CInterface (green light stays on during charging, turns off when fully charged);

6）Alarm response time: less than10s；

7）Alarm threshold deviation:-17%-+25%：

8）Weight:128g；

9）Size:120*66*24mm.

5Protective goggles

1）Material: Polycarbonate lenses.

2）Scratch resistant coating;

3）Side wing ventilation design, while discharging moisture, reduces the entry of dust;

*4）Bring China's labor safetyLAIdentification (photo proof required); Need to provideCMATesting reports from qualified labor product testing institutions.

6Protective shoes

1）Function: Anti smashing, anti piercingWear resistant, etc；

2）Shoe upper material: cowhide;

3）Sole: Thick and wear-resistant rubber outsole;

4）WithLASecurity certification labels and certificates.

7、Personal protective bag(Empty package)

1）Size:20Inch;

*2）Material: Oxford cloth+PEThe bottom is slightly thickened and wear-resistant plastic bottom;

*3）Carrying method: Can be carried over the shoulder or crossbody, can be carried by hand, can be pulled (with pulley), and the pull rod is detachable;

4）Equipped with waterproof coating/Wear resistant, scratch resistant, and unbreakable;

5）Size:50*21*33cm；

*6）Customized on demandlogo.

8Protective face mask

1）Configuration: Half face maskX1Filter boxX2Filter cotton coverX2Filter cottonX2.

2）Double filtration can filter out gasoline, benzene and its homologues, organic vapors, carbon disulfide, dust, acetone, ether, etc;

3）3MElectrostatic filter material, low respiratory resistance, high protection efficiency;

4）Service life: Cumulative use200h；

5）Main material: silicone;

6）Adjustable headband, four levels of elastic adjustment for comfortable wearing position, polyester/Spandex textile headband with long-lasting elasticity;

7）Cold flow exhalation valve reduces respiratory resistance and stuffiness, making exhalation smoother;

8）Precision injection molding provides higher precision and product stability, reduces the number of components, and simplifies the cleaning process;

※9）Product certified by multiple countries: ChinaLAauthentication;