Permeable medium pressure blower for powder particle transportation

Permeable medium pressure blower for powder particle transportationFeatures:

*Medium pressure, high air volume, low noise, lightweight
*Using aluminum alloy material, significantly reducing weight and achieving the goal of lightweighting
*The motor is designed for I.E.C. (1HP or above), with a fully enclosed external fan aluminum frame motor and a special axis design, suitable for long-term use.
*Special blade design, high pressure, large air volume, low noise, long lifespan.
*Special air volume control damper, with high stability in air volume control and easy operation.
*Can be modified to: (vertical, horizontal, insulated, DC) four major characteristics;

*The machine has a complete range of types, and the air outlet can be adjusted to three directions according to the actual situation: horizontal, horizontal reverse, and air outlet facing up. There is a large inventory and fast delivery.

Permeable medium pressure blower for powder particle transportationMechanical installation:
1. Medium pressure ducted fans should be installed in a sturdy and sturdy location on the ground, with sufficient space around for easy inspection, maintenance, and upkeep.
2. The foundation should be kept level under the base of the medium pressure turbine, and it is recommended to use shock-absorbing rubber or bolt casting at the four corners of the base to ensure medium pressure ventilation
The Pu style fan operates smoothly with minimal vibration.
3. The connecting pipeline between the medium pressure turbine and the system should be sealed reliably. For small vacuum pumps, metal pipelines can be used to connect the sealing gasket, which should be made of oil resistant rubber,
For small and medium pressure turbine fans, vacuum hose connections can be used. The pipe diameter should not be smaller than the suction diameter of the medium pressure turbine fan, and the pipe should be short with few bends. (When welding pipelines, welding slag should be removed from the pipeline, and it is strictly prohibited for welding slag to enter the vacuum pump chamber.)
4. In the connecting pipeline, users can install valves and vacuum gauges above the inlet of the medium pressure turbo fan to check the medium pressure turbo fan at any time
The ultimate pressure.
5. Connect the power supply according to the regulations on the motor label, ground the wire, and install fuses and thermal relays of appropriate specifications.
6. When the medium pressure turbo fan is powered on for trial operation, the motor belt must be removed to confirm that the vacuum pump rotates in the specified direction before it can be put into use, and the medium pressure turbo fan can be reversed for oil injection. (Turn in the direction indicated by the protective cover)