PTHW ordinary electric heating sleeve

NegotiableUpdate on 05/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

PTHW ordinary electric heating sleeve is an electric heating sleeve that achieves constant temperature heating through electronic pressure regulation. It uses alkali free glass fiber as insulation material, and Cr20Ni80 alloy wire spring is installed in it. It is insulated with a hemispherical insulation body formed by vacuum shaping with aluminum silicate cotton. The shell is injection molded in one go, and the upper cover adopts electrostatic spraying technology. Due to the use of spherical heating, the heating area of the container can reach more than 60%. It has the characteristics of fast heating, high temperature, easy operation, and durability.

Product Details

1、 Product Introduction:

PTHW ordinary electric heating sleeveIt is an electric heating sleeve that achieves constant temperature heating through electronic pressure regulation. It uses alkali free glass fiber as insulation material, with Cr20Ni80 alloy wire spring installed in it. It is insulated with a hemispherical insulation body formed by vacuum shaping with aluminum silicate cotton. The shell is injection molded in one go, and the upper cover adopts electrostatic spraying technology. Due to the use of spherical heating, the heating area of the container can reach more than 60%. It has the characteristics of fast heating, high temperature, easy operation, and durability.

2、 Usage:

PTHW ordinary electric heating sleevePlug in the power, the green light indicates power, and the red light indicates heating. Adjust the knob clockwise to increase the temperature from low to high. When the knob is adjusted to a certain scale, the temperature inside the sleeve reaches a certain basic constant temperature, but requires the assistance of a thermometer for measurement. For the initial heating, the temperature can be appropriately raised or adjusted to the highest level. When the desired temperature is reached or the solution boils, the knob can be lowered for insulation heating to extend the service life. When not in use for a short period of time, the knob can be adjusted to 0 to stop heating. When not in use for a long time, the power should be turned off.

3、 Model and parameters:

parameter

voltage	220V 50HZ
Volume (ml)	50	100	150	250	500	1000
Power (W)	110	130	170	210	230	530
temperature control accuracy	±1℃
heating temperature	The maximum surface temperature is 380 ℃
heating time	50ml 水 1025min	130ml 水 1025min	150ml 水 1025min	250ml 水 1025min	250ml 水 1025min	250ml 水 1025min
Material of electric furnace wire	Cr20Ni80
insulating layer	Alkali free glass fiber, with a heat resistance of up to 450 ℃
Insulation coefficient	When the relative humidity is ≤ 35%, 500M
thermal insulation layer	Insulated and vacuum formed by environmentally friendly material aluminum silicate cotton
Upper opening diameter (mm)	58	75	80	95	115	145
Depth (mm)	35	40	40	60	70	85
Shell diameter (mm)	200	200	200	230	230	260
Shell height (mm)	140	140	140	155	155	165
Weight (g)	1100+50	1200+50	1200+50	1300+50	1300+50	1500+50

parameter

voltage	220V 50HZ
Volume (ml)	2000	3000		5000	10000		20000
Power (W)	650	1100		2100	3000		5000
temperature control accuracy	±1℃
heating temperature	The maximum surface temperature is 380 ℃
heating time	8-12min		1216min			1525min
Material of electric furnace wire	Cr20Ni80
insulating layer	Alkali free glass fiber, with a heat resistance of up to 450 ℃
Insulation coefficient	Relative humidity 35%~500M
thermal insulation layer	Insulated and vacuum formed by environmentally friendly material aluminum silicate cotton
Upper opening diameter (mm)	180	212		253	305		384
Depth (mm)	105	125		145	475		205
Shell diameter (mm)	270	300		340	400		480
Shell height (mm)	190	200		230	260		300
Weight (g)	2930+100	3000+200		4550+400	6850+500		8350+200