PT-3000 bending diameter detection system

PT-3000 Bending diameter detection system（Folding Diameter Detection System）

1、 System Overview

The palm joint machine is mainly used to shape plastic film materials into roll bag shaped packaging materials of corresponding sizes according to the process of palm joint. However, there may be a certain degree of error in the width of the bag after palm closing, and if the error exceeds a certain range, it will result in waste. And the speed of the handheld device is very fast, usually in300rice/For more than minutes, it is difficult for operators to measure the size after closing during the closing process.

PT-3000The bending diameter detection system mainlyDifficulty in measuring the bending diameter of handheld devicesDeveloped byThe system can achieve real-time measurement of the edge distance after high-speed palm closing, and accurately measure and display the real-time edge distance size.

IIproductadvantage

1. The software interface is concise and clear, with simple and easy-to-use operation, enabling one click measurement without the need for settings.
2. The software has fast computing speed and can meet the requirements of handheld devicesHigh speed measurement requirements above 350 meters per minute.
3. Real time display of measured width and width variation curve:
4. You can independently set product margin warning lines and scrap lines.
5. Save measurement data and quickly browse history through a dedicated browser for easy traceability.

• performance metrics

1. camera：1 high-speed 2K black and white camera；
2. Measurement width: maximum measurement width250mm；
3. measurementSpeed: highest450rice/Divide;
4. Measurement accuracy:0.125mm。

• System Standard Configuration Table

5、 Performance indicators of handheld system (template free)