PARKER ISO Pneumatic Solenoid Valve - H Series

PARKER ISO Pneumatic Solenoid Valve - H Series

• The H series ISO valve, with sizes 01 (26mm) and 02 (18mm), is an inner pilot/outer pilot base plate mounted valve The functions of the valve are optional:
  
  5/2 two position five way, single electronic control and dual electronic control
  5/3 three position five way, medium sealing function, dual electronic control
  Two, 3/2 two position three-way, dual electronic control, NC/NC，NO/NO，NC/NO
  Two, 3/2 two three-way connectors, NC/NC
  
  Valves with ISO sizes 01 and 02 in the H series can be installed with or without plugs, and can be mounted on independent baseboards or manifolds composed of multiple valves. The valve with size 02 can be installed with a 1/8 'NPT/BSPP threaded interface on the manifold, while the valve with size 01 can be installed on the bottom plate or manifold with 1/4' NPT/BSPP bottom and side interfaces
  
  When a valve without a plug is installed on a manifold, the wiring options can be terminal blocks (only suitable for size 01), 6 'leads, built-in circuit boards in the base plate, or centralized wiring on the left end board. Centralized wiring options: 25 pin Dsub multi pin plug, 16 point terminal block, M23 12 and 19 pin, 19 pin Brad Harrison connector, and valve drive module can connect the valve to industrial networks, for example: Ethernet I/P，Devicenet，Controlnet，Profibus，Canopen，ASi，Interbus-S，Modbus/TCP， Or Profinet. When the valve is installed on the base without a plug, it can be installed on the base plate or busbar, but the coil can be directly connected to the cable with an M12 plug.
  
  Valves with ISO sizes 01 and 02 can be easily converted from internal pilot valves to external pilot valves by flipping the gasket under the coil. Internal pilot refers to the pressure at inlet # 1 being connected to the outlet of the pilot valve. During operation, the air pressure passes through and reaches one end of the main valve core, pushing it to move. The external pilot refers to the valve's' internal 'pressure coming from the' external pilot port 'rather than the intake port # 1. These valves can be used in H-series industrial communication systems, Turcknet or Moduflex fieldbus
  
  • Function (s): Dual 3/2 two position three-way, 5/2 two position four-way, 5/3 three position four-way
  • Operation: Electromagnetic control
  Installation type: base plate, busbar
  Installation complies with ISO 15407-115407-2 standard
  Number of valves that can be installed on the manifold: 32
  Interface size: 1/8 ', 1/4'
  • Interface thread type: BSPP, NPT
  Small traffic (Cv): 0.55
  • High traffic (Cv): 1.1
  Voltage range: 24VDC -120VAC
  Electromagnetic coil connection type: 15407-1:4-pin M1215407-2:25-pin D-sub multi pin plug, 19 pin Brad Harrison connector, 12 pin M23, 19 pin M23, 16 point terminal block
  • Industrial network options: Ethernet I/P，Devicenet，Controlnet，Profibus，Canopen，ASi，Interbus-S，Modbus/TCP，Profinet
  
  Certificate/Approval: CSA/C-US, NEMA 4, IP65
  • Pressure range (PSI): VAC -145
  • Small starting pressure of solenoid valve (PSI): 25
  • Temperature range (℃): -15 to 49
  • Temperature range (F): 5 to 120
  • Medium: Inert gas
  • Power: 1W, 2VA
  Valve body material: Aluminum
  Sealing material: Dingqing rubber
• PARKER ISO Pneumatic Solenoid Valve - H Series

• Valve type

  Dual 3-way, 4-way

  Number of locations

  2 people, 3 people

  number of ports

  5 channels

  drive

  Electromagnetic pilot control

  Coverage function

  Not applicable

  Installation type

  Bottom plate, busbar

  Assembly standards

  ISO 15407-1, 15407-2

  Multiple export types

  32

  Port size

  1/8' | 1/4

  port type

  BSPP, NPT

  Small traffic (CV)

  0.55

  High traffic volume (CV)

  1.1

  Nominal traffic (QN-L/MIN)

  Not applicable

  High flow rate (Q MAX - L/MIN)

  Not applicable

  Provide input voltage

  24VDC, 120VAC

  power connection

  15407-1: 4-pin M12 | 15407-2: 25 pin multi pin plug, 19 pin Brad Harrison connector, 12 pin M23, 19 pin M23, 16 point terminal strap

  Fieldbus protocol

  Ethernet I/P, Devicenet, ControlNet, Profibus, CANopen, ASi, Interbus-S, Modbus/TCP, Profinet

  certificate

  CSA/C-US, NEMA 4, IP65

  Pressure Range (PSIG)

  VAC - 145

  Pressure Range (BAR)

  VAC to 10

  Small operating pressure (PSIG)

  25

  Temperature range (C)

  -15 to+49

  Temperature coefficient (F)

  +5 to+120

  medium

  noble gas

  lubricate

  No need

  Electricity consumption

  1W, 2VA

  Valve body material

  aluminium

  sealing material

  Dingqing Rubber

• Printing technical specifications