Original Parker high-pressure miniature solenoid valve 015-0102-900

Parker Original High Pressure Micro Valve 015 Series High Pressure Valve

Model: 015-0102-900

Stainless steel high-strength valve body, suitable for high-pressure and harsh working conditions

Sensitive action, durable, small size, high pressure resistance, and impact resistance

Industrial automation, compatible with high-pressure water, hydraulic oil, and clean gases

Preferred accessories for industrial high-voltage circuit control

Original Parker high-pressure miniature solenoid valve 015-0102-900

PARKER 015-0102-900 High Pressure Valve (Series 15 High Pressure Solenoid Valve)

Positioning: Parker Series 15 high-pressure direct acting solenoid valve from the United States, model 015-0102-900, featuring high pressure, small size, low power consumption, and high durability, used for precision control of high-pressure liquids/gases.

1、 Core parameters (model analysis+specifications)

Model disassembly:

015=Series 15 (High Pressure Micro Electromagnetic Valve)

0102=2-way, normally closed (NC), 1/8 'NPT interface

900=High pressure version, stainless steel valve body, FKM seal DC24V

Pressure: up to 5000 psi (350 bar), direct action zero pressure differential start

Material:

Valve body: 316 stainless steel (forged)

Valve core/seal: 316 stainless steel+FKM (fluororubber)

Liquid contact: all metal+FKM, no plastic, resistant to high pressure, oil, and weak corrosion

Electrical: DC24V (± 10%), power of about 10W, coil F-class (155 ℃)

Temperature: -20 ℃~+120 ℃ (medium), maximum environment * *+85 ℃**

Interface: 1/8 'NPT internal thread, flow direction fixed (valve body with arrow)

Lifespan: ≥ 1 million cycles (high voltage stable), response time<30ms

2、 Working principle (high-pressure type vs ordinary inert valve)

Same: The electromagnetic coil is energized and attracted, the spring is reset, and the direct acting switch (energized on, de energized off).

Key Differences (High Voltage Design):

Valve body strength: forged 316 stainless steel, thickened wall thickness, resistant to high pressure deformation at 350 bar (inert valve is PEEK, maximum 100psi).

Sealing structure: Metal+FKM composite seal, self tightening seal under high pressure, zero leakage at bubble level (inert valve is PTFE soft seal, suitable for low pressure).

Valve core design: Bold stainless steel valve core, resistant to high pressure impact, anti jamming (inert valve uses PTFE valve core, low pressure and low wear).

3、 Typical application scenarios

High pressure hydraulic: hydraulic press, high-pressure cleaning, hydraulic fixture (300-350 bar)

Oil and gas/energy: wellhead control, high-pressure gas (nitrogen, natural gas) on/off, high-pressure water injection

Industrial high-pressure fluids: high-pressure water, hydraulic oil, emulsion, weak acid-base media

Testing equipment: high pressure withstand test, pressure testing machine, high pressure reactor control

4、 Key points of use (avoiding pitfalls+extending lifespan)

1. Installation

Flow direction: Strictly follow the FLOW arrow on the valve body, and reverse installation is prohibited (high pressure can easily damage the seal).

Location: Priority horizontal installation, coil facing upwards; Avoid inversion (high pressure gravity affects sealing).

Torque: Tighten the interface by 15-20 N · m, apply force to the valve body hexagon, do not break the coil.

Filtering: Install a 50 μ m high-pressure filter in front of the valve to prevent impurities from sticking to the valve core (which is prone to damage due to sticking under high pressure).

2. Electrical

Voltage: DC24V ± 10%, AC220V or overvoltage (high voltage coils are prone to burning) is strictly prohibited.

Heat dissipation: Continuous operation requires ventilation, with an ambient temperature below 85 ℃.

Wiring: Shielded wire with single end grounding to prevent interference; Coil waterproof and moisture-proof (IP65).

3. Media and taboos

✅ Applicable: high-pressure water, hydraulic oil, emulsion, weak acid and alkali, high-pressure gas (nitrogen, air).

❌ Prohibited: Strong acids, strong solvents (acetone, dichloromethane), media containing solid particles, high-temperature asphalt.

Long term shutdown: Rinse with clean high-pressure oil/water, keep the valve moist, and prohibit dry discharge (high-pressure dry grinding is vulnerable to sealing).

4. Maintenance

Daily inspection: Check for leaks every week, listen for movement sounds (crisp "click" sound), and ensure normal pressure.

Regular maintenance: Rinse the flow path every 6 months and replace FKM seals (high pressure is prone to aging) every 1 year.

5、 One sentence summary (viral/customer language)

PARKER 015-0102-900: Series 15 high-pressure solenoid valve, 316 stainless steel valve body resistant to 350 bar high pressure, FKM seal zero leakage, direct action zero pressure difference, DC24V low power consumption; Installation should check the flow direction, filter before the valve, and ensure stable voltage. High pressure hydraulic/oil and gas/testing equipment should be durable, leak proof, and responsive.

Original Parker high-pressure miniature solenoid valve 015-0102-900