001-0017-900 Parker miniature inert isolation valve imported from the United States

001-0017-900 Parker miniature inert isolation valve imported from the United States

PARKER 001-0017-900

3-way miniature isolation solenoid valve

Wet zone full PTFE+glass material, medium isolation

Eliminate corrosion and cross contamination, specifically for high-purity/corrosive fluids

Stable and durable, with an ultra long lifespan, low leakage and anti-corrosion properties, specialized for instruments and equipment

PARKER 001-0017-900 (Series 1 Miniature Inert Isolation Valve)

Positioning: 3 normally closed (NC), PTFE fully isolated, direct acting micro solenoid valves, specializing in high-purity/strongly corrosive media, medical/analytical instrument scenarios.

✅ Core parameters (easy to understand at a glance)

Model: 001-0017-900 (Series 1, 3-way)

Function: 3-Way, Normally Closed

Voltage: DC12V, power consumption: 2.5W

Pressure: Vacuum~20psi (1.4bar)

Aperture: 1.52mm (0.060 ')

Flow rate: maximum 600cm ³/min

Material: Wet zone full PTFE+borosilicate glass (no metal contact medium)

Leakage rate:<0.016cm ³/min（ He@150psi ）

Response:<12ms, lifespan of 10 million cycles

Interface: 1/4 '-28 UNF thread

Size: 25.4 × 25.4 × 53.3mm, weight 76.5g

⚙️ Working principle (isolation valve core)

Structural isolation: The electromagnetic zone (coil/iron core/spring) and fluid zone (PTFE channel) are separated by PTFE membrane, and the medium only touches PTFE/glass and does not touch any metal.

Power off (normally closed): The spring is pressed down, the diaphragm is pressed against the valve seat, the three-way port is closed, and the medium is cut off.

Power on (open): The coil attracts and moves the iron core upward, the diaphragm rebounds, the flow channel is opened, and the medium switches/flows.

Zero pressure start: Direct acting design, no pressure difference required, can operate directly under vacuum/zero pressure.

🎯 Key advantages (why choose it)

Fully inert wet zone: PTFE+borosilicate glass, resistant to strong acids and alkalis, organic solvents, high-purity reagents, and free from metal ion contamination.

Ultra fine leakage: helium sealed, suitable for mass spectrometry, chromatography, medical respiratory/anesthesia equipment.

Millisecond level response: Direct acting, high-frequency start stop stability (10 million cycles life).

Compact and lightweight: 25.4mm square, suitable for dense installation of instruments.

🩺 Typical Applications

Medical: ventilators, anesthesia equipment, endoscopic pneumoperitoneum machines, negative pressure wound treatment

Analytical instruments: liquid chromatography (HPLC) solvent switching, mass spectrometry, gas analysis

High purity fluids: reagent distribution, corrosive liquid control, semiconductor high-purity gas path

🆚 Comparison within the same series (001 vs 002)

001-0017-900:3 is usually closed, used for circuit switching/gas path reversal

002-0017-900:2 normally closed, used for simple on/off/switch control

The core of PARKER miniature isolation valve (representative series: Series 1/2 PTFE isolation valve, R9 9mm isolation valve, X-Valve isolation type) is a fully inert flow path+electromagnetic isolation drive+ultra small volume+low residual seal, specifically designed to solve the precise on/off and distribution of corrosive/high-purity media. It is commonly used in analytical instruments, medical equipment, chemical and life science scenarios.

1、 Core functions

Media isolation: The flow path is isolated from the electromagnetic coil, with only PTFE, borosilicate glass, or PEEK/FFKM in contact with the medium, zero metal contamination, no ion precipitation, suitable for strong acids and bases, organic solvents, high-purity reagents, and biological fluids.

Precise on-off/distribution: 2-way/3-way optional, millisecond level response (<20ms), achieving precise switching, micro distribution of liquid/gas circuits.

Ultra low leakage+low residue: helium leakage rate<0.016 sccm; The dead volume is as low as 4-96 μ L, reducing reagent residue, cross contamination, and waste.

Zero pressure start: Direct acting design, can be switched on and off without working pressure, stable operation within a vacuum range of -20psi (1.4bar).

2、 Key features (advantages at a glance)

Fully inert wet zone

Material: PTFE+borosilicate glass (Series1/2) or PEEK+FFKM (R9/X series)

Advantages: Resistant to almost all chemicals, biocompatible, non absorbent, easy to clean.

Ultra compact miniaturization

Size: 8mm (X)/9mm (R9)/25mm (Series1/2) wide, length 23-50mm

Advantages: intensive installation, miniaturization of instruments, and compatibility with portable devices.

Electromagnetic direct drive+low power consumption

Driver: DC12/24V, 2.5-4.2W, partially with hold mode (reduced power consumption)

Advantages: Fast response, no pneumatic delay, low heat generation, suitable for long-term online use.

High sealing+long lifespan

Sealing: Class VI, stable over a wide temperature range (4-66 ℃); Lifespan * *>10 million times**

Advantages: Maintenance free, low leakage, suitable for sterile/explosion-proof scenarios.

flexible configuration

Function: 2 normally closed, 3 connected (diversion/switching)

Interface: 1/4-28 UNF, face seal, busbar

Flow rate: up to 600-900 sccm (water), suitable for trace to medium flow rates.

Partial model display of PARKER micro isolation valve 001 series:

001-0017-900 001-0017-904 001-0017-907

001-0017-914 001-0022-900 001-0028-900

001-0029-900 001-0030-900 001-0038-900

001-0043-901 001-0043-907 001-0043-909

001-0091-900 001-0092-900 001-0094-900

001-0097-901 001-0099-900 001-0111-900

001-0111-901 001-0129-900 001-0140-900

001-0141-900 001-0141-901 001-0142-900

001-0142-901 001-0143-900 001-0143-901

001-0144-900 001-0146-900 001-0155-900

001-0156-900 001-0157-900 001-0157-901

001-0165-900 001-0165-901 001-0168-900

001-0168-901 001-0176-900 001-0177-900

001-0185-900 001-0192-900 001-0207-900

001-0208-900 001-0210-900 001-0213-900

001-0222-900 001-0223-900 001-0231-900

001-0232-900 001-0236-900 001-0239-900

001-0242-900 001-0245-900 001-0246-900

001-0246-901 001-0249-900 001-0250-900

001-0251-900 001-0252-900 001-0253-900

001-0254-900 001-0255-900 001-0256-900

001-0257-900 001-0261-900 001-0264-900

001-0265-900 001-0267-900 001-0268-900

001-0268-901 001-0269-900 001-0270-900

001-0271-900 001-0272-900 001-0273-900

001-0274-900 001-0275-900 001-0276-900

001-0279-900 001-0280-900 001-0281-900

001-0282-900 001-0284-900 001-0288-900

001-0289-900 001-0291-900 001-0292-900

001-0295-900001-0017-900 Parker miniature inert isolation valve imported from the United States