Original MTS displacement sensor RHM1500MD701S1B8100

Shanghai Weitelui Industrial Development Co., Ltd. is a service trader in the field of industrial control automation in China. The company has a branch in Germany, specializing in the import trade and engineering services of various foreign industrial control automation products. At present, the company's products and services are widely used in many industries such as metallurgy, petrochemicals, papermaking, electronics, automobiles, machine tools, power plants, hydraulic systems, etc. All products are guaranteed to be original, with a penalty of ten for each fake product! Imported spare parts can provide customs declaration, proof of origin, free shipping for orders, and a 12-month warranty for all imported products!

Original MTS displacement sensor RHM1500MD701S1B8100

The MTS displacement sensor RHM1500MD701S1B8100 is a Temposonics R series rod type magnetostrictive product designed specifically for 1500mm long stroke industrial scenarios, with outstanding core advantages. Using non-contact measurement technology, the linearity deviation is less than 0.01% FS, the repeatability accuracy is less than 0.001% FS, the resolution is 1 μ m, and the data is not lost when the power is turned off. It can work when the power is restored; Output 4-20mA standard signal, suitable for most industrial control systems.

This sensor has significant advantages in measurement performance and environmental adaptation. In terms of measurement performance, it relies on the principle of magnetostriction and 16 bit DAC conversion, with a linearity deviation of less than 0.01% FS, a repeatability accuracy of less than 0.001% FS, a resolution of 1 μ m, and the ability to accurately capture micro displacements even over long distances; Measurement design, no data loss during power outage, normal operation upon power restoration, avoiding production interruption. The update time is 1.0ms, which can achieve high-speed dynamic measurement and adapt to real-time feedback of moving parts.

Original MTS displacement sensor RHM1500MD701S1B8100

Installation steps:

Mechanical fixation: When installed internally, the sensor is fixed to the cylinder head through a threaded flange to ensure that the measuring rod is coaxial with the cylinder axis; External installation requires parallel fixation along the cylinder body through a bracket to ensure that the sensor and piston rod move in the same direction. The installation torque should be controlled at around 45Nm (referring to the R series standard) to avoid excessive tightening and damage to the casing.

Magnetic ring assembly: Install the standard axial magnetic ring on the piston or piston rod linkage, ensuring that the magnetic ring is coaxial with the measuring rod. Radial eccentricity and tilt can cause signal interference; The coupling gap should be strictly controlled within 1-3mm, and thick magnetic steel parts should be avoided between magnetic circuits. Stainless steel isolation should be used if necessary.

Electrical connection: Connect cables through D70 series standard plugs, distinguish power supply (24V DC) and 4-20mA signal lines according to the wiring diagram, and do not reverse the positive and negative poles; The signal cable uses twisted pair shielded wire, with the shielding layer grounded at one end (near the controller end), and the cable routing is away from strong electrical circuits to reduce electromagnetic interference.