Oral research cold and hot circulation device

one、Oral research cold and hot circulation deviceTechnical parameters:

1Temperature control range of low-temperature tank:0～100℃Constant temperature wave degree:≦±0.5℃Temperature control range of the constant temperature bath:RT～100℃Constant temperature wave degree:≦±0.8℃The display accuracy is:±0.1℃The uniformity is:±0.5℃

2Low temperature tank cooling power:368WHeating power:1500W×2(Double slot)

3Effective volume of liquid tank:≥10LNet size of studio:290×190×200mm

4Adjustable range of slot to slot conversion speed:30～150 rpm

5Adjustable range of dwell time in the slot:1～300S

6Adjustable range of cycle times:1～9999time

7Controller surface:LCDLCD display, capable of controlling temperature, conversion speed, dwell time, and number of cycles (upgraded)

8Conversion of support frame load:≦500G (can also be customized)

9Dimensions: Approximately680×460×840mm

10Power supply voltage:220V 50Hz

11Sample box size: diameter70mm, height70mmThe circular hanging basket is made of304Stainless steel (can also be customized according to requirements).

12Equipment material: The shell is made of1.0Made of high-quality cold plate electrostatic spraying, the inner liner adopts1.0of premium304Made of stainless steel.

two、Oral research cold and hot circulation deviceWorking principle:

Mainly used for automatically switching and placing test samples between high and low temperature zones in water tanks, the entire switching action is completed separately by the robotic arm. The sample is first immersed in a low-temperature tank for a certain period of time and then lifted out of the liquid surface by the robotic arm. It is then automatically placed into the high-temperature tank and left for a certain period of time before being lifted out again from the high-temperature tankReturn to the low-temperature water tank, this process is counted as one cycle per unit. The placement time, number of cycles, and movement speed of the robotic arm of the sample in two different temperature zones of the water tank can be freely set by the microcomputer controller.

Regularly ensure the completeness of the cold and hot cycle instrument and its accessories, carefully keep records of the instrument's history, and ensure that the accounts, cards, and items match. When conducting a power on inspection and discovering phenomena such as sparking, smoking, explosion, and odor, immediately shut down and report to the supervisor to prevent damage to the instrument due to short circuits and extend its service life.

Regularly maintain and upkeep the integrated cold and hot cycle system, promptly troubleshoot instrument malfunctions, keep maintenance records, and clean and maintain large equipment 2-4 times per semester. The damaged integrated cold and hot cycle system should be repaired by professional personnel from the equipment center. If external repair is required, an application should be submitted to the equipment department.

The management personnel of the integrated cold and hot cycle system equipment should strive to learn the business and improve their management, maintenance, and upkeep skills. Large precision instruments should be managed by dedicated personnel, with responsibility assigned to individuals. Other personnel are not allowed to operate them arbitrarily, and general instruments should not be moved arbitrarily. The instrument management personnel should be notified when leaving or returning to the laboratory. After the instrument is returned, its performance should be checked by the instrument management personnel before use, and satisfactory results should be displayed before use.

IIISpecialized for dental researchCold and hot cycle analyzerPrecautions for operation and use:

1. When the device is running, please do not use it unless necessaryOpen the box door casually, otherwise it may lead to the following adverse consequences. If high-temperature hot air rushes out of the box during high-temperature testing, it is very dangerous.

2. If during low-temperature testing, the freezing system is prone to frosting, which affects the testing effect; If the inside of the box door still maintains high temperature, causing injury, the high-temperature air may also trigger a fire alarm, resulting in misoperation.

3. Please note that it must be safely grounded to avoid static electricity induction.

4. Avoid shutting down and restarting the refrigeration unit within three minutes.

5. When using water cooling in winter, please use tap water or treated soft water to keep the cooling system circuit smooth.

6. If a heating sample is placed in the cold and hot cycle impact tank, please use an external power supply for the sample power control, and do not directly use the local power supply.

4Specialized for dental researchCold and hot cycle analyzerPrice reference:

National unified price: 39800 yuan, with some discounts available on the transaction price.

1. This product provides one-year free after-sales service, and after the warranty period, only the material cost price is waived for maintenance. Lifetime technical support and maintenance are provided.

2. This product is only professionally developed and produced by our company and Tianjin Sen * * in China. It has great market promotion value and once created millions of profits for my dental hospital customers in one year. It is highly recommended! The selling price of similar products abroad is over 100000 yuan. There are already some imitation manufacturers in China, but their quality, production experience, and strength are not guaranteed. Please noteMeaning.

3. This product holds a professional testing organization metrology certificate and other related certificates. Please feel free to contact us for consultation.