Optical components

The optical module $r $n includes a slide rail and sliding platform, support rod and support seat, independent support rod and support seat, angle conversion clamp, height base and fork type pressure plate, sliding substrate, base fixture, angle fixing seat

Sliding rails and sliding platforms

Product Name:Micro optical track and carrier

Product Description:

track

l Provide metric and imperial versions.

l Width: 10mm

l Height: 21 millimeters

l Available lengths: 2 inches, 4 inches, 6 inches, 8 inches, 300 millimeters, 450 millimeters, and 600 millimeters.

l Track and carrier are sold separately.

carrier

l Available widths: 12 millimeters and 40 millimeters.

feature

l These workbenches are made of precision machined integral aluminum alloy, providing a precise and stable platform for installation.

l Easy to carry and space saving.

l Adopting a swallowtail design, the optical carrier can easily and stably slide, place, and remove on the optical track.

l The clamping steps at both ends are designed to ensure a secure interconnection between the tracks.

l It can be easily installed on optical tables, breadboards, and other platforms.

l Combined with other optical components for prototyping.

l By interconnecting the tracks, infinite extension length can be achieved.

Product Specifications

track

carrier

Product Name:Optical track width=50 millimeters

Product Description:

track

l Provide metric and imperial versions.

l Width: 50 millimeters

l Height: 24.5 millimeters

l Optional lengths: 250mm, 500mm, 750mm, 1000mm.

l Track and carrier are sold separately.

carrier

l Available widths: 25mm and 65mm.

feature

l The straightness should be controlled within ± 0.2 millimeters per meter.

l The metric scale design is convenient for use in two directions.

l The long groove and low profile optical track contribute to its multifunctional installation capability.

l The overall aluminum structure is treated with black anodizing to improve durability.

l Space saving low profile design.

Product Specifications

track

carrier

Product Name:Swallowtail rail - width 120mm

Product Description:

track

l Width: 120mm

l Height: 34.5 millimeters

l Available lengths: 250mm, 500mm, 750mm, and 1000mm.

l There are engraved markings every 1 millimeter.

l The straightness should be controlled within ± 0.2 millimeters per meter.

l Track and carrier are sold separately.

carrier

l Available widths: 40mm, 80mm, 88mm.

feature

l These tracks are precision machined from integral aluminum alloy, providing a precise and stable platform for installation.

l The dovetail sliding mounting seat allows for quick and easy connection to the carrier, ensuring parallel and even positioning.

l There are metric scales on both sides, indicating the exact distance between the carriers.

l Due to its symmetrical design, it is easier to place the carrier on the dovetail track from two directions and has greater versatility.

Product Specifications

track

carrier

Product Name:Tailtail rail with gears - width 120mm

Product Description:

track

l Width: 120mm

l Height: 34.5 millimeters

l Optional lengths: 300mm, 600mm, 900mm.

l There are engraved markings every 1 millimeter.

l Straightness: ± 0.2 millimeters per meter.

l Micrometer reading: 0.1 millimeters when using 01PCR-2M/01PCR-2 carriers.

l Made of single piece aluminum alloy with black surface treatment.

l Track and carrier are sold separately.

carrier

l Equipped with M4 (8-32) and M6 (1/4-20) threaded mounting holes.

l Micrometer reading: 0.1 millimeters.

feature

l The long stroke rack and pinion worktable is designed to facilitate the integration of equipment that requires positioning.

l The various types of threaded holes on the carrier provide multiple connection methods with different devices and components.

l There is a small thumb screw attached to the carrier for users to easily lock the position.

l Adopting a swallowtail structure, the small gear and track are designed together.

l Rotate the thumb screw with the small gear installed to adjust the position.

Product Specifications

Support rod and support seat

Product Name:Micro column and gripper - diameter 8mm

Product Description:

pillar

l Stainless steel material.

l Diameter: 8 millimeters.

l Each end has M4 (8-32) and M6 (1/4-20) threaded holes.

l Optional length: 25.4 millimeters to 76.2 millimeters (1 inch to 3 inches).

l There is a 4mm diameter hole on the side that allows customers to lock it.

l Equipped with 53HFC-1 (M) mini height fixing ring (sold separately).

gripper

l Inner diameter: 8 millimeters.

l There are M6 (1/4-20) threaded holes at the bottom.

l Optional height: 25.4 millimeters to 76.2 millimeters (1 inch to 3 inches).

l Each column clamp has its own thumb screw to stabilize the column.

l Compatible with 53MPS series 8mm diameter columns.

feature

l Various lengths of stainless steel columns and black aluminum alloy column clamps are combined to achieve any height.

l The eccentric arc-shaped design inside the entire hole avoids sliding when fixing the column with thumb screws, forming a stable coplanar shape.

Product Specifications

pillar

gripper

Product Name:Magnetic column clamp with universal base - diameter 12.7 millimeters

Product Description:

l Suitable for columns with a diameter of 12.7 millimeters.

l Cooperate with the clamping fork to reduce assembly time.

l 360 degree continuous rotating base for easy installation.

l The bottom magnet provides stable holding force when fixed to the optical table.

l Pre installed spring loaded hex screws for easy positioning.

l The length of the column clamp is 76.2 millimeters.

l When the thumb screw is locked, high stability is achieved through the two rows of contact at the bottom.

l M6 (1/4-20) groove hole, flexible fixing method.

Product Specifications

Product Name:Optical column - diameter 12 millimeters

Product Description:

l Precision polished stainless steel column with a diameter of 12 millimeters.

l The available lengths range from 25.4 millimeters to 304.8 millimeters (1 inch to 12 inches).

l One end has M4 (8-32) threaded holes, and the other end has M6 (1/4-20) threaded holes.

l There is a 4mm diameter through-hole on the side of the column body, through which a hex wrench can be inserted to provide additional leverage force when tightening the installation components.

l It can be directly connected to surfaces or bases with the same thread.

l By combining columns of different lengths with clamps made of various black anodized aluminum materials, any height can be obtained.

l Both ends have different threaded holes to provide greater flexibility when combined with components.

The length can be customized according to requirements.

Product Specifications

Product Name:Optical column bracket - Ø 12mm

Product Description:

l The inner diameter is 12 millimeters.

l Length selection: Available from 25.4 millimeters to 152.4 millimeters (1 inch to 6 inches).

l The bottom end has M6 (1/4-20) threaded holes for easy installation on a base, table, or breadboard. All column brackets are equipped with a thumb screw to secure the position of the column.

l Each column bracket includes a preloaded spring and a solid hexagonal locking thumb screw to ensure the stability and rigidity of the column.

l The eccentric arc design inside the entire hole prevents sliding when fixing the column with thumb screws, forming a stable coplanar shape.

l By combining column supports and installation columns of different heights, specific height requirements for different applications can be met.

l Suggested maximum torque: 30 kgf-cm

l Before final tightening, the position of the installed equipment can be slightly adjusted with one hand.

*Attention: It is not recommended to use an L-shaped wrench to tighten the thumb screw in place, as this may cause the screw head to break.*

Product Specifications

Product Name:Optical Column - Ø 12.7mm

Product Description:

l Precision polished stainless steel column with a diameter of 12.7 millimeters.

l Length selection: Available from 25.4 millimeters to 304.8 millimeters (1 inch to 12 inches).

l One end has M4 (8-32) threaded holes, and the other end has M6 (1/4-20) threaded holes.

l There is a 4mm diameter through hole on the side of the column, through which a hexagonal driver can be inserted to provide additional leverage force when fastening and installing components.

l It can be directly connected to the same threaded surface or base.

l By combining columns of different lengths with various black anodized aluminum material supports, any height can be obtained.

l Both ends have different threaded holes, making it more flexible when combined with components.

l When used in conjunction with the 03HFC series fixtures, it can maintain a fixed height of the column and allow users to rotate the equipment or structure at the same height.

*The length can be customized according to requirements.*

Product Specifications

Product Name:Optical column bracket - Ø 12.7mm

Product Description:

The inner diameter is 12.7 millimeters (0.5 inches).

● Optional length: Available from 25.4 millimeters to 152.4 millimeters (1 inch to 6 inches).

The bottom end is equipped with M6 (1/4-20) threaded holes for easy installation on a base, table, or breadboard. All column brackets are equipped with thumb screws to secure the position of the columns.

Each column bracket includes a preloaded spring and a solid hexagonal locking thumb screw to ensure the stability and rigidity of the column.

The eccentric arc-shaped design throughout the hole prevents sliding when the thumb screw is used to secure the column to form a stable coplanar shape.

By combining column brackets and installation columns of different heights, specific height requirements for different applications can be met.

Suggested maximum torque: 30 kgf cm

Before final tightening, the position of the installed equipment can be slightly adjusted with one hand.

*Attention: We do not recommend using an L-shaped wrench to tighten thumb screws as this may cause the screw head to break.*

Product Specifications

Product Name:Column neck collar

Product Description:

● Neck collar used to limit column height or rotation.

Suitable for columns with diameters of Ø 8mm and Ø 12.7mm.

Adopting O-type and C-type designs.

Product Specifications

Product Name:thread adapter

Product Description:

● Adopting hexagonal screws and an outward to outward design.

Made of 303 stainless steel material.

The 07SRA series threaded adapter can be used for hexagonal drives inserted through a 4mm diameter hole.

Suitable for installing columns, column supports, mounting bases, and platforms.

Product Specifications

Independent support rod and support seat

Product Name:Isolation column and bracket - Ø 12.7mm

Product Description:

separation post

Aluminum alloy material, black anodized treatment.

● Diameter: 12.7 millimeters (0.5 inches).

Both ends have M4 (8-32) and M6 (1/4-20) screw holes.

● Optional length: 50.8 millimeters to 254 millimeters (2 inches to 10 inches).

V-shaped groove design.

Only used in conjunction with the 03MHO series isolation bracket.

Isolation bracket

The inner diameter is 12.7 millimeters (0.5 inches) and the outer diameter is 25 millimeters.

There are M6 (1/4-20) threaded holes at the bottom.

● Optional height: 50.8 millimeters to 101.6 millimeters (2 inches to 4 inches).

Only used in conjunction with 03MPO series isolation columns.

Features:

The orientation can be determined by isolating the thumb screw Z at the bottom of the installation bracket.

The bottom of the isolation bracket can be rotated 360 ° and locked for optical axis alignment.

The length can be customized according to requirements.

Product Specifications

separation post

Isolation bracket

Product NameIsolation column and bracket - Ø 18mm

Product Description:

separation post

Aluminum alloy material, black anodized treatment.

Diameter: 18 millimeters (0.7 inches).

Both ends have M4 (8-32) and M6 (1/4-20) screw holes.

● Optional length: 50.8 millimeters to 152.4 millimeters (2 inches to 6 inches).

V-shaped groove design.

Only used in conjunction with 03MHI series isolation brackets.

Isolation bracket

The inner diameter is 18 millimeters and the outer diameter is 38 millimeters.

There are M6 (1/4-20) threaded holes at the bottom.

● Optional height: 50.8 millimeters to 101.6 millimeters (2 inches to 4 inches).

Only used in conjunction with 03MPI series isolation columns.

Features:

The orientation can be determined by isolating the thumb screw Z at the bottom of the installation bracket.

The bottom of the isolation bracket can be rotated 360 ° and locked for optical axis alignment.

The length can be customized according to requirements.

Product Specifications

separation post

Isolation bracket

Product Name:thread adapter

Product Description:

● Adopting hexagonal screws and an outward to outward design.

Made of 303 stainless steel material.

The 07SRA series threaded adapter can be used for hexagonal drives inserted through a 4mm diameter hole.

Suitable for installing columns, column supports, mounting bases, and platforms.

Product Specifications

Angle conversion clip

Product NameAngle conversion clip

Product Specifications

Height base and fork type pressure plate

Product Name:Fixed base and fork frame

Product Description:

l Provide both metric and imperial versions.

l Compared to traditional column/column frame systems, it has better stability.

l The base diameter is larger than any other traditional column/bracket system, providing better stability for installing optical components.

l The product itself can be stacked tightly and stably to increase height without sliding.

l There is a through-hole with M6 (1/4-20) in the center, which is used to fix it on the column or column bracket.

l Used in conjunction with the 02SHA series, 02FHP series, and 02FEP series to increase height.

Product Specifications

Product Name:Height pedestal

Product Description:

Height selection: 12.7mm to 101.6mm (0.5 inches to 4 inches).

Due to its larger diameter and increased stiffness, the fixed height base ensures more significant stability than traditional column and column support systems.

It has better stability than traditional column and column support systems.

There are two different threaded holes at both ends, making it more flexible when combined with components.

There is an M4 (8-32) threaded hole at the top and an M6 (1/4-20) threaded hole at the bottom.

Solid stainless steel material increases rigidity and stability.

● Lateral diameter. 4mm or 6.5mm holes passing through the column; A hexagonal screwdriver can be inserted into the hole to provide additional leverage when tightening the installed components.

Other heights can be provided upon request

Product Specifications