Mirror lens holder

The mirror lens holder $r $n includes fixed optical mirror holders, vertical mirror holders, hexagonal rotating mirror holders, nut adjustable mirror holders, industrial grade optical mirror holders, open type optical mirror holders, and so on

Fixed optical mirror holder

Product Name:fixed frame

Product Description:

● Integrated design.

Low cost and easy to use.

The fixing screw with polyformaldehyde (PFOM) J-end ensures that the optical element is fixed on the frame.

Suitable for optical components with diameters of 12.7 millimeters (0.5 inches), 25.4 millimeters (1 inch), and 50.8 millimeters (2 inches).

● Rear installation can be carried out through M4 (8-32) threaded holes.

The outer diameter of 04MTE-0.5M is 25.4 millimeters, compatible with any 25.4 millimeter (1 inch) frame, such as 04 PMT-1M, to enhance flexibility and functionality.

Product Specifications

Product Name:Fixed mirror frame with retaining ring

Product Description:

● Integrated design.

The 04MTC series is equipped with a retaining ring that can firmly fix optical components and can be installed on M4 (8-32) or M6 (1/4-20) threaded posts.

The retaining ring design ensures the safe installation of optical components.

Use a retaining ring to securely fix optical components, which is convenient and non-destructive.

● Includes an integral retaining ring.

Product Specifications

Product Name:Foldable mirror frame and lens frame

Product Description:

In order to allow optical components to be located inside and outside the optical path, a foldable bracket is an ideal choice.

After installing a 25.4mm (1-inch) mirror frame, an optical switch or optical path selector can also be used.

Product Specifications

Vertical reflector base

Product Name:Vertical reflector base

Product Description:

Suitable for optical component selection with diameters of 12.7 millimeters (0.5 inches) and 25.4 millimeters (1 inch).

The tilt adjustment range is ± 3.5 °.

The top adjustment adopts hexagonal head screws to save space.

Stainless steel precision screws and phosphor bronze bushings are an ideal combination, providing stability, no shaking, and long-term stability.

The ball wedge drive mechanism enhances the overall performance of the optical mirror holder, ensuring short-term and long-term stability and repeatability.

The gap between the stainless steel precision screw and the bushing is very small, and damping grease is used to form an almost negligible gap combination.

When space is limited, the bottom plate can be disassembled.

Other diameters of optical components can be provided upon request.

Product Specifications

Hexagonal rotating mirror holder

Product Name:Hexagonal drive actuator mirror frame

Product Description:

Suitable for optical component selection with diameters of 12.7 millimeters (0.5 inches) and 25.4 millimeters (1 inch).

The tilt adjustment range is ± 3.0 ° to ± 4.0 °.

Adjust the movement using M6x0.25mm stainless steel hexagonal head high-precision screws.

Stainless steel precision screws and phosphor bronze bushings are an ideal combination, providing stability, no shaking, and long-term stability.

Lock the optical components by tightening the screws with formaldehyde.

The tolerance between stainless steel precision screws and bushings is very small, and damping grease is used to form an almost negligible gap combination.

Accurate adjustment can be made on M6x0.25mm stainless steel screws using a hexagonal key or a detachable actuator knob (07SRN series).

The detachable actuator knob (07SRN series) is sold separately.

Product Specifications

Product Name:detachablehex keyknob

Product Description:

Specially designed for hexagonal head adjustment screws.

Easy to insert 2mm or 3mm hex head adjustment screws.

● Diameter: 12 millimeters or 15 millimeters.

● Precise control through fingertips.

When the screw is moved to the desired position, it is easy to disassemble.

Product Specifications

Nut adjustable reflector base

Product Name:Miniature series mirror holder

Product Description:

Selection of optical components with apertures ranging from 12.7mm (0.5 inches) to 25.4mm (1 inch) in diameter.

The tilt adjustment range is ± 3.5 °~± 4.0 °

Adjust with 8-80 and M4x0.25mm stainless steel high-precision finger screws.

Product Specifications

Product Name:Optical mirror holder with a diameter of 25.4mm

Product Description:

Both metric and imperial systems are acceptable.

The aperture of an optical element with a diameter of 25.4mm (1 inch).

The tilt adjustment range is ± 3.5 °

Adjust with M6x0.25mm stainless steel high-precision finger screw.

Stainless steel precision lead screws and phosphor bronze bushings are an ideal combination that provide smoothness, no swing, and long-term stability.

Lock the optical components with POM fixing screws (except for the 04RMT series).

There is a very tight tolerance and damping grease between the stainless steel precision screw and the bushing, forming a negligible gap combination.

Product Specifications

Product NameOptical mirror holder with a diameter of 50.8mm

Product Description:

Both metric and imperial systems are acceptable.

We provide optical mirror holders of different shapes and functions that you need.

All optical components suitable for a diameter of 50.8mm (2 inches).

The tilt adjustment range is ± 3.5 °.

Product Specifications

Product Name:Translation mirror holder

Product Description:

Suitable for optical component selection with diameters ranging from 25.4 millimeters (1 inch) to 50.8 millimeters (2 inches).

Adjust the movement using M4x0.25mm or M6x0.25mm stainless steel high-precision thumb screws.

These models are designed for general purposes and use fixed rings to lock optical components.

Stainless steel precision screws and phosphor bronze bushings are an ideal combination, providing stability, no shaking, and long-term stability.

The tolerance between stainless steel precision screws and bushings is very small, and damping grease is used to form an almost negligible gap combination.

Product Specifications

Industrial grade optical mirror holder

Product Name:Industrial grade optical mirror holder

Product Description:

Tilt adjustment range ± 3.5 °

Special 25.4mm (1 inch) diameter optical component.

Ensure the same reflective plane, regardless of optical thickness.

Adjust the movement through M6x0.25mm stainless steel high-precision screws.

The side lock screw prevents rotation when moved to the correct position.

Strong springs increase long-term stability.

Product Specifications

Open type optical mirror holder

Product Name:Open type optical mirror holder

Product Description:

Quadrant optical components

Aperture of optical elements with diameters of 25.4mm (1 inch) and 50.8mm (2 inches).

The tilt adjustment range is ± 3.5.

Adjust the movement using M6X0.25mm stainless steel high-precision thumb screw.

Stainless steel precision lead screws and phosphor bronze bushings are an ideal combination, providing smoothness, vibration free, and long-term stability.

Product Specifications

Dustproof 90 degree reflector base

Product NameDustproof 90 degree reflector base

Product Description:

● ± 3 degree independent orthogonal frame.

M4x0.25mm fine adjustment screw.

Suitable for 25.4mm (1 inch) optical components with a thickness not exceeding 6mm.

12mm clear aperture right angle beam transmission at the exit.

Sealed design, dust-free after adjustment.

Provide surface and side mounting holes.

● Interlocking function.

A 1.035 "-40 buckle ring used for installing optical components.

Two surfaces have internal 1.035 "-40 threads for alignment.

Product Specifications

Adjustable large-sized mirror holder

Product Name:Mirror holder and beam splitter frame

Product Description:

l Three models are available for fixing optical components with diameters of 50.8mm, 101.6mm, and 152.4mm (2-inch, 4-inch, and 6-inch).

l The circular reflector or spectroscope is firmly fixed in place with a fixing ring to ensure stable positioning.

l Fine/rough adjustments can be made using thumb screws and micrometers to secure the reflector or spectroscope in the appropriate position.

l In addition, when the system remains at a fixed azimuth, the installed components can be placed at any height.

l By turning the thumb screw on the side, 360 degree azimuth adjustment of the Q direction can be achieved.

l By using a micrometer on the same side as the thumb screw, the azimuth angle can be finely adjusted.

l By turning the thumb screw at the center, 360 degree rotation adjustment of the Q direction can be achieved.

l By using the micrometer on the other side, fine adjustments can be made for rotation.

Product Specifications

Product Name:5-axis large optical mirror holder

Product Description:

● Provide 5-axis adjustment for X, Y, Z, θ X, and θ Y.

● Tray range: 25mm in XY direction and 50mm in Z direction.

Tilt/J-end (θ x, θ y) angle range: ± 3 degrees, using M6x0.25mm precision finger screws.

Center height: 133 millimeters.

3 claws self centering optical bracket, with a maximum diameter of 152.4mm (6 inches) and a thickness of up to 25mm.

The bracket can be adjusted from 0 to a full diameter of 152.4mm (6 inches) through a knob.

Resolution: 0.01mm in XYZ direction.

6-M6 (1/4-20) clearance hole, used for installation on the optical table.

Aluminum alloy material and black anodizing.

Product Specifications

Product NameRod style rearview mirror mounting bracket

Product Description:

Both metric and imperial systems are acceptable.

Supports mirrors with diameters of 25.4mm, 38.1mm, 50.8mm, and 101.6mm (1 inch, 1.5 inches, 2 inches, and 4 inches).

The angle range in each direction is ± 4 °

The mirror bracket is connected to a 38.1mm (1.5-inch) mounting rod (sold separately as the 07LSR-1 (M) model) to move the height along the rod and adjust the tilt/J end by itself.

Product Specifications

Adjustable lens holder

Product Name:Self centering lens holder

Product Description:

Any lens that reaches the maximum inner diameter of these mirror holders can be conveniently fixed, with accurate, fast, and repeatable center position, regardless of the lens diameter.

There are two models that can accommodate optical components with a diameter of up to 100 millimeters (3.9 inches).

Pull the stainless steel pin to open a spring-loaded inner ring, with three optical support rods radiating to facilitate finger insertion and removal of optical components.

When the lens is located in the V-shaped groove, release the stainless steel pin, and then the spring on the arm can gently fix the lens to the car.

A conveniently located stainless steel pin rotates a spring-loaded inner ring, which is supported by three optical support rods that rotate radially to provide automatic centering.

The lens is fixed by an undamaged stainless steel rod with an improved V-shaped groove J-end, which can clamp the edge of thin lenses.

This is very useful when it is necessary to exchange lenses of different diameters while maintaining a constant height of the optical axis.

● Concentricity ≤ ± 0.1mm.

Product Specifications

Product Name:Adjustable radius clamp

Product Description:

By using these clamps, circular objects such as lenses, reflectors, or laser tubes can be quickly and safely fixed.

The J-end of the non rotating V-shaped groove can be centered and securely fixed to objects.

Each clamp is equipped with a stainless steel ball as a guide to smoothly adjust the clamp arm, ensuring that the circular target object can be accurately centered and fixed.

Product Specifications

Product Name:Adjustable optical mirror holder

Product Description:

● V型槽底座可快速使光学器件居中。

● Equipped with coarse and fine adjustment functions.

Product Specifications

Product Name: V-shaped block cylindrical object mirror holder

Product Description:

The V-shaped groove base is not only suitable for large cylindrical objects such as laser heads, but also for fixing optical components with a set screw with polyoxymethylene (POM) J-end.

Suitable for optical devices or cylindrical objects with a maximum diameter of 52 millimeters.

This component can be assembled and used with 07RCP series rod clamps and 07LSR series tripod rods. Allow for vertical and horizontal height adjustments.

There are two M6 (1/4-20) clearance mounting holes that can be used to connect the 07RCP series for height adjustment.

There are three M4 (8-32) clearance mounting holes that can be used to connect 03PRT-4M to adjust the tilt.

Release the side roller knob, slide the rigid rod clamp downwards until the lens/filter is stable, and then tighten the side roller knob to secure the lens/filter.

A larger diameter cylindrical target mirror holder can be provided upon request.

Product Specifications

Optical mirror holder accessories

Product NameOptical mirror holder accessories

Product Specifications

Selection Guide for Lens Tube Series