- Phone
-
Address
Room 311-1, Building 3, 2388 Xiupu Road, Pudong New Area, Shanghai
Shanghai Qingmiao Optoelectronics Technology Co., Ltd
Room 311-1, Building 3, 2388 Xiupu Road, Pudong New Area, Shanghai
Online oil leakage monitoring device
The measurement of oil film thickness on the surface of water bodies is an important issue in fields such as environmental protection, petrochemicals, and heat exchange cycles. The sensor measurement method used in this monitor has the characteristics of simple principle, convenient measurement, low cost, and high accuracy, which is of great significance for achieving dynamic online measurement of oil film thickness on water surface.
1、 Environmental Protection: The Core Requirement for Ecological Security and Pollution Emergency Response
1. Oil spill pollution in oceans, ports, and rivers is often caused by accidents, and is one of the most widespread, long-lasting, and destructive types of marine pollution to the ecological environment. With the rapid development of the shipping and offshore oil extraction industries, water surface oil spill pollution is increasing day by day. The enormous destructive effect of oil spills on the ecological environment has attracted the attention of management departments, and a standing detection system has been established to monitor and manage oil spill pollution.
Responsibility definition for compliant discharge and real-time monitoring of water pollution
Real time monitoring of oil film thickness is required in areas such as industrial wastewater discharge outlets and ports. If the oil film thickness suddenly increases, the system will automatically trigger the emergency shut-off valve to prevent pollution from spreading to natural water bodies.
2、 Petrochemical industry: rigid requirements for risk prevention and compliance management
Production facility leak warning
The rainwater system, storage tank area, and pipeline interfaces in the petrochemical plant area are high-risk points for leakage. The oil film monitor detects the thickness of the oil film in real time through the principle of capacitance change.
2. Petrochemical cooling system
Mixing heat transfer oil or lubricating oil into the cooling water tank will reduce the heat transfer efficiency. The sensor can detect thin oil film and provide feedback on the thickness of the oil film, avoiding tube bursting accidents caused by oil fouling and scaling in the heat exchanger.
Online oil leakage detector
3、 The value of measuring oil film thickness
Conducting measurements of oil spill film thickness and achieving online measurement of oil spill film thickness on water surfaces has broad application prospects. It can accurately estimate the oil spill situation and provide a basis for developing treatment plans for different degrees of oil spill accidents, which is of great significance for rapid response to oil spill accidents.
Oil film thickness measurement is an environmental risk prevention and control measure“outpost”Industrial safety operation“eyes”Energy Efficiency Optimization“ruler”.
Equipment parameters:
diameter300mmSensor float,Good anti wave ability, accurate detection of oil leakage, and convenient use in small indoor spaces or large outdoor water bodies. By adding anti wind and wave accessories, it can further reduce and resist the sway of large waves.
Range:0.5-35mm
Resolution:0.01mm
Power supply: optional220VACThe24VDCThe12VDC
Analog signal:4-20mA
Digital signal: standardmodbus RTU RS485
Output: One passive alarm signal
Instrument controller wall-mounted
Size:280*200*108mm
Sealing grade:IP66
Material:ABS
Display: Dot matrix LCDLCD
Chinese menu, membrane buttons
The material and smooth surface of the floating structure and electrode probe can prevent oil stains from adhering
Avoid false alarms caused by the accumulation of lubricating oil and dirt on the electrode probe
The maximum detectable thickness of the oil layer can be reached35mm
※ Can detect high viscosity oil quality
※ Adopting oil resistance,Anti chemical agents,weather resistance,Plastic materials with fire-resistant properties
The system alarm can be triggered when the power supply is interrupted\\Timely alarm in case of cable breakage or short circuit.