OM5 anti-corrosion coating is easy to apply with polytetrafluoroethylene paint

OMAnti corrosion coating is a type of anti-corrosion coating with an effective ingredient of a high molecular weight penetrating polymer added with anti-corrosion pigments, which has good weather resistance and anti-corrosion performance. The paint film is hard, has good adhesion, and is shiny and full. Has good wear resistance, acid resistance, water resistance, oil resistance, heat resistance and other properties. The paint film is hard, wear-resistant, and has good density. The paint film has resistance to corrosive dry, hot, and humid gases such as carbon monoxide and sulfur dioxide.

This type of coating dries naturally at room temperature and is suitable for factories and on-site steel structures and concrete without drying equipment for its chemical resistance. The penetration and sealing functions of interface agent coatings, as well as their corrosive properties against corrosive wastewater, strong acids, strong bases, and salts. Has good bonding performance, can bond strongly with steel equipment and concrete facilities, the coating cures at room temperature, dries quickly, and has excellent mechanical properties.

OM5 anti-corrosion coating is easy to apply with polytetrafluoroethylene paintThe flake glass adhesive system has excellent resistance to chemical media, high temperature and wet corrosive gas properties, extremely low water vapor permeability, small hardening shrinkage rate, low coefficient of linear expansion, high temperature and strong temperature impact resistance, low wear performance, room temperature hardening and other characteristics. It has been successfully applied to the anti-corrosion lining of power plant desulfurization devices, smelting plant system flue walls, etc., effectively extending the service life of the anti-corrosion lining. The anti-corrosion engineer pointed out that with the continuous improvement of anti-corrosion technology performance, conditions such as reduced weight of anti-corrosion materials, ease of construction and maintenance of anti-corrosion materials have been proposedKM-1042The desulfurization and anti-corrosion coatings have been widely applied and have received widespread praise.

Based on the spray acid-base corrosion characteristics of desulfurization towers, desulfurization equipment, and desulfurization related components, proprietary solutions have been developed through years of research and exploration on desulfurization towers, desulfurization equipment, and desulfurization related componentsKM-1042Special anti-corrosion coating for desulfurization, developed for desulfurization and anti-corrosion properties. This coating has high temperature resistance and can withstand temperatures up to850℃, acid and alkali resistance, foam, friction and corrosionKM-1042The desulfurization specific anti-corrosion coating has high hardness, strong wear resistance, excellent material fatigue loss under temperature changes, high bending resistance, high bonding strength, high coating density, easy application, lightweight coating, and can be applied in thick layers without cracking or delamination,KM-1042Special anti-corrosion coatings for desulfurization are widely used in desulfurization tower substrates, overflow tanks, oxidation tanks, slurry tanks, dust removal desulfurizers, desulfurization related components, flue chimneys, heat exchangers, defoggers, fan casings and blades, desulfurization pumps, preheaters for anti-corrosion, wear-resistant, and anti vibration purposes.

OM5 anti-corrosion coating is easy to apply with polytetrafluoroethylene paintAs a new type of desulfurization and anti-corrosion material, KM-1042 desulfurization specific anti-corrosion coating should have the following properties: resistance to acid corrosion penetration, high-temperature and high-pressure synthetic resin, and high-temperature recrystallized ceramic fillers selected for KM-1042 desulfurization specific anti-corrosion coating,bluntStrong chemical resistance, not easily corroded by acid oxidation, high coating density, not easily corroded by acid penetration, able to withstand acid corrosion in different states and at different temperatures; Alkali resistant frictional corrosion,KM-1042The high-temperature and high-pressure synthetic resin and high-temperature recrystallized ceramic filler used for desulfurization specific anti-corrosion coatings have good oxidation resistance, high coating hardness, and are resistant to friction and corrosion caused by limestone slurry and OH - ion oxidation; High friction resistance, ZS-1042 desulfurization specific anti-corrosion coating has high impact resistance, high hardness, and can resist large amounts of dust erosion in high-speed flue gas and high-speed solid slurry spray erosion; The anti-corrosion construction is simple, and the dust, rust, and powder layer on the substrate are cleaned up. The KM-1042 desulfurization special anti-corrosion coating is directly applied, with a single coating and a unified bottom surface, without the need for lining. It is easy to maintain and repair, and can be directly repaired, with high economic value. Lightweight, greatly reducing the weight of the desulfurization tower. The thickness requirement for the coating of the desulfurization special anti-corrosion coating is low, and the specific gravity is small in this province. There is no need to add any materials in the coating, and the overall anti-corrosion material is lightweight.