Epoxy IPN8710 anti-corrosion coating, food grade anti-corrosion paint for water plants

Epoxy IPN8710 anti-corrosion coating, food grade anti-corrosion paint for water plantsIPN8710The main uses of anti-corrosion paint are:

（1）Suitable for anti-corrosion decorative coating of indoor and outdoor steel structures, concrete buildings, buried cement structures, coal mine supports, etc. in petrochemicals, metallurgy, electricity, gas cabinets, transportation bridges, iron towers, ports, etc.

（2）For cement surfaces, the primer base material should be used first. After mixing the A and B groups, the filler should be added and mixed evenly instead of putty. The cement wall surface should be smoothed with the slurry,24 - 36After hours, use sandpaper to smooth it out and it can be painted.

（3）The construction condition for this paint is temperature5-35℃, relative temperature ≤ 75 ℃, or the surface temperature of the coated material should be higher than the dew point temperature 3 Construction is not allowed above ℃ in conditions of rain, fog, snow, and large dust.

Low environmental pollution.IPN8710The solvent-free epoxy drinking water tank paint is a two-component coating composed of epoxy resin, titanium, pigments, additives, solvents, and epoxy curing agent polyamide resin. This product has excellent physical and chemical properties.

Epoxy IPN8710 anti-corrosion coating, food grade anti-corrosion paint for water plantsIPN8710The interpenetrating network heavy-duty anti-corrosion coating is a two-component coating with good flexibility. After curing, the coating has high hardness and can be used for the inner walls of structures and leak proof anti-corrosion facilities. It can also be used for containing fuel oil and the inner walls of concrete containers.

IPN8710Anti corrosion coatings have chemical properties that resist acid, alkali, salt, oxidants, and water vapor corrosion. It also has physical properties such as dense structure, waterproof permeability, adhesion, toughness, and fullness.IPN8710Anti corrosion coatings can be divided into two types, as follows:

1. IPN8710anti-corrosive coating-1Composed of polyurethane polyethylene, modified epoxy resin and additives, anti rust pigments, etc., it solidifies at room temperature to form an interpenetrating network. The coating structure is dense and corrosion-resistant to acids, alkalis, and salts, with excellent anti-corrosion performance and strong adhesion; this kind ofIPN8710Anti corrosion coatings are commonly used as primer anti-corrosion coatings for the inner walls of water supply pipelines.

2. IPN8710anti-corrosive coating3Composed of epoxy resin, modified rubber resin, anti rust pigment, additives, etc. It has a series of chemical inertness, non toxicity, and resistance to microbial corrosion, and is mainly used as a topcoat in anti-corrosion coatings for water supply pipelines.

IPN8710Is anti-corrosion coating only applicable to water supply pipelines? This question is simply asking too well. althoughIPN8710Mainly used for water supply pipelines, but not only for water supply pipelines, this anti-corrosion coating has relevant applications in underground submerged structures and dock steel piles.

IPN8710Anti corrosion coating is a two-component anti-corrosion coating product made by grinding and finely filtering polyurethane resin, modified epoxy resin, anti rust pigments, and additives. Its paint film has good toughness, excellent bonding strength, wear resistance, rust resistance, and corrosion resistance. Therefore, in addition toIPN8710In addition to the application of anti-corrosion coatings on water supply pipelines, they are also suitable for underground submerged structures and dock steel piles under various soil conditions. However, we can see thatIPN8710The main application environment of anti-corrosion coatings is still related to water. It is a special anti-corrosion coating with waterproof and anti rust functions. In conclusion,IPN8710Anti corrosion coatings are not only used for water supply pipelines.

Used for flour compartment IPN8710 drinking water coating with strong adhesionIPN8710Precautions for anti-corrosion coatings:

1. IPN8710The storage of anti-corrosion coatings should be placed in a cool, ventilated, and dry place, isolated from fire and kept away from heat sources;

2.This product（IPN8710Anti corrosion coating is a type of concentrated coating product that can be used for thick coating construction. It is suitable for hanging and can be used directly without adding diluent after opening the bucket;

3. IPN8710Anti corrosion coatings will settle over a long period of time, so if stored for a long time, please stir evenly before use;

4.inIPN8710After the surface of the anti-corrosion coating primer is dry, the topcoat can be applied. The interval at room temperature should not exceed two days. Otherwise, it will affect the bonding between the primer and topcoat.