Norgren 54D pressure sensor

Norgren 54D pressure sensorThe model

54D-P016G-DD0-AA、54D-V110G-DD0-AA、54D-P016G-DA1-AA、54D-V101G-DA1-AA、

The correct installation method for pressure sensors 54D-P016G-DA1-AA and 54D-V101G-DA1-AA

(1) Verify the frequency response value of the pressure sensor under normal atmospheric pressure and standard temperature conditions using appropriate instruments.

(2) Verify the correctness of the coding of the pressure sensor and the corresponding frequency response signal.

(3) The pressure sensor must be installed along the cable and installed at the cable joint.

(4) Each cable should be equipped with no less than 4 pressure sensors, and the two pressure sensors near the telephone office should be no more than 200m apart.

Norgren 54D pressure sensorThe application

The 54D-P016G-DD0-AA and 54D-V110G-DD0-AA pressure sensors are widely used sensors. Traditional pressure sensors are mainly composed of mechanical structural components, which indicate pressure through the deformation of elastic elements. However, this structure is large in size and heavy in weight, and cannot provide electrical output. With the development of semiconductor technology, semiconductor pressure sensors have also emerged. The characteristics of 54D-P016G-DA1-AA and 54D-V101G-DA1-AA are small size, light weight, high accuracy, and good temperature characteristics. Especially with the development of MEMS technology, semiconductor sensors are moving towards miniaturization, with low power consumption and high reliability.