- Phone
-
Address
1707-1708, T3 Office Building, Huamao Building, No. 11 Wenchang 1st Road, Jiangbei, Huizhou City
Product Categories
Huizhou Huagao Instrument Equipment Co., Ltd
Non destructive testing instrument micro focus X-ray fluoroscopy inspection device
NegotiableUpdate on 05/06
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The non-destructive testing instrument micro focus X-ray fluoroscopy inspection device $r $nXslicer SMX-6010 is a straight irradiation type X-ray inspection equipment, equipped with a produced micro focus X-ray generator and high resolution flat panel detector. Through high-definition and wide dynamic range images, subtle internal structures and defects can be observed. In addition, it is possible to easily and quickly switch between perspective/CT modes, and implement various observations according to work requirements. The inspections covered range from electronic components that are constantly shrinking in size to multi-layered substrates with increasing density.
Product Details
Please consult customer service for the delivery time and price of this product! Thank you!
Non destructive testing instrument micro focus X-ray fluoroscopy inspection device
A direct X-ray inspection equipment equipped with a micro focus X-ray generator and a high-resolution flat panel detector produced by Shimadzu. Through high-definition and wide dynamic range images, subtle internal structures and defects can be observed. In addition, it is possible to easily and quickly switch between perspective/CT modes, and implement various observations according to work requirements. The inspection covered by the Xslicense SMX-6010 ranges from electronic components with continuously decreasing volume to multi-layer solid substrates with increasing density.
The principle and characteristics of oblique CT imaging
Can capture plate-shaped samples at high magnification
■ Tilted CT
When using oblique CT to capture large solid boards, etc
As the sample is on the XY stage, it can be moved closer to the X-ray generator for high magnification imaging.
■ Linear CT
Linear CT imaging of large substrates, etc
If the sample is placed close to the X-ray generator in order to obtain high magnification, it will interfere with the X-ray during CT imaging, making it impossible to perform high magnification photography.
Observing examples
If it is a sample on a substrate, unlike linear CT affected by sample width, oblique CT can perform high magnification photography.
Non destructive testing instrument micro focus X-ray fluoroscopy inspection device
System Composition
Our company's self-made X-ray generator and system equipped with various safety mechanisms for easy maintenance,Realize lower cost and safer use
X-ray generator:Equipped with an open tube X-ray generator with a tube voltage of 160kV · 1 μ m resolution. Realize the integration of high-voltage generators without the need for maintenance of high-voltage cables. The automatic adjustment function makes it easier to replace the filament.
※ 1 μ m resolution: JIMA Chart test
X-ray detector:Equipped with a 3-megapixel tablet detector.
5-axis loading platform
In addition to the XYZ axes of the sample stage, the detector will also tilt and rotate. 5-axis linkage, supporting inspection of all angles.
X-ray protective box
Shielding X-rays leaking to the outside of the device (radiation leaking to the outside is less than 1 μ Sv/h). Equipped with a front door locking mechanism, the front door cannot be opened during X-ray irradiation. At the same time, with an interlocking mechanism, the 5-axis loading platform does not move when the door is open.
Collision detection sensor
Collision detection sensors are installed around the X-ray detector, and in case of emergency (sample collision), the drive system stops working.
matching
It can only operate under the condition of AC200 V ± 10% 1.5 kVA (ground resistance below 100 Ω). No need to supply air, cooling water, etc.
Similar Product Recommend
