New standard cement mortar mixer

NegotiableUpdate on 05/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The new standard application and scope of cement mortar mixer $r $n $r $n is manufactured according to the unified drawings of the Cement Institute of China National Building Materials Institute, and is a standard equipment that complies with the international strength test method (ISO679) implemented in China. It can also replace JC/T722 as a mixer for GB/T17671 cement mortar test method. $r $n $r $n is one of the equipment used in cement testing laboratories of cement plants, construction units, relevant professional colleges, and research institutions.

Product Details

New standard for cement mortar mixerMain structure and working principle

1、 Structure: It mainly consists of a touch screen, controller, servo system, automatic lifting device, sanding box, transmission box, spindle, eccentric seat, mixing blade, mixing pot, base, transmission mechanism, support, protective cover, etc.

2Working principle (see Figure 1)

Close the protective door(1)Turn on the power and control the mixing pot through the touch screen(3)Automatically ascend, and after ascending to the designated position, the servo motor(10)Rotate. speed reducer(12)Regarding servo motors(10)After deceleration, the transmission mechanism has two pulleys(14)Synchronous belt(16)Transfer power to the main shaft(18). Spindle(18)Drive the eccentric seat(22)Synchronize rotation to fix it on the eccentric seat(22)The mixing blade on top(25)Make a revolution. Simultaneously mixing blades(25)Through blade axis(23)Upper planetary gear(20)Surrounding a fixed internal gear(21)Complete the rotational motion. After adding sand to the sand tank, it can be automatically or manually added within the specified time. After mixing is complete, the mixing pot(3)It can automatically descend to zero position.

Lifting and installation

1This machine is equipped with a lifting device.

2Installation only requires placing the host on a flat cement platform and placing a thick layer on the bottom surface5~8mmRubber sheet.

3The foot pad has been installed before leaving the factory. If the height is not uniform, the foot pad nut can be rotated to adjust it appropriately.