Concrete sulfate dry wet cycle testing machine

Concrete sulfate dry wet cycle testing machineTechnical parameters that can be sent:

1. Testeable items: 54 pieces

2. Experimental period: 24 hours

3. High operating power: 1.5KW

4. Test piece size: 100 × 100 × 100mm

5. Soaking solution: 5% Na2SO4 solution

6. Power supply: 220V/50Hz

After unpacking, check if the instrument is intact and undamaged, and then place the instrument on a horizontal surface.
3. Check if the power supply is stable (in case of instability, the user unit is required to equip the machine with a voltage regulator of more than two kilowatts), then connect the power supply, turn on the power switch, the indicator light will turn on, the instrument will emit a normal temperature alarm sound, press the instrument button to stop the alarm, and then turn on the work switch (note that the instrument has a three minute protection extension). After three minutes, the instrument will start working, the work light will turn on, and the compressor will start. The machine has already set the temperature to -25 ℃ when it leaves the factory. If your unit wants to change the operating temperature, please reset it according to the instrument manual.
Purpose and Features
1. This instrument is suitable for low-temperature detection of cement, concrete, various waterproofing membranes, profiles, and plastics.
2. The main body of this instrument is combined with the use of new digital technology in our factory for low-temperature improvement, making the product have application characteristics. The improved product has functions such as fast cooling speed, digital temperature control, and low-temperature operation.
Technical parameters of low-temperature test chamber
1. The size of this box is 268L
2. Temperature control range, naturally up to - negative 40 ℃
3. Temperature control accuracy, 1 ℃
4. Power supply voltage, 220V, 50HZ