New fully automatic fluoride ion analyzer

Basic introduction:HC-800 Fully Automatic Fluoride Ion AnalyzerThe main characteristics of

Application areas: various fluorinated substances; For example, fluorine-containing acid washes in industry, industrial wastewater, urine fluoride, glass thinning etching solution, fluorine-containing ions in industrial hydrochloric acid, fluorine-containing substances in soil, drinking water, food and beverage, surface water, etc. Automatic injection for rapid quantitative analysis, accurate measurement values; Real time online monitoring and laboratory monitoring can be freely selected; Continuous batch measurement, instrument calibration, and automatic measurement; Outstanding industrial application performance; Measurement using ion selective electrode method

Urine fluoride detection, serum fluoride ion detection, fluoride ion analyzer, fluoride ion detector, fluoride ion detection

High quality supply

HC-800 Fully Automatic Fluoride Ion AnalyzerMeasurement range: 0-190 mg/L, 0-12000 mg/L;

Sample types: urine, serum, and various water samples;

1. Resolution: 0.01mg/L;

2. Testing time:<3 minutes;

3. Display mode: dual display (LCD display and thermal printing);

4. Communication interface: RS232, USB 2.0 (dual communication interface);

5. Voltage: AC220V ± 10%;

6. Frequency: 50Hz;

7. Power: ＜ 60W;

8. Dimensions: 38.5 * 23.5 * 34.5cm;

9. Instrument working conditions:

① Environmental temperature: 10-35 ℃;

② Relative humidity of the air:<85%;

③ There is no strong magnetic field interference around except for the Earth's magnetic field;

10. Information management software (optional).

Venue requirements

The platform for installing instruments should be stable and avoid instrument vibration.

2. The instrument should avoid direct sunlight and moisture.

3. Maintain a normal ventilation environment without any coverings.

4. Ensure that the surrounding environment is clean and free of dust.

5. There should be a certain amount of free space around the instrument, and the installation position of the instrument should not affect the operation of the disconnect device.

6. The instrument must use a plug with a grounding wire, and when using an external power source, it must be ensured that the grounding wire is in good condition.

7. Try to keep the instrument away from electrical equipment that may cause electromagnetic interference, such as motors, X-ray equipment, etc; Stay away from explosive gases, etc.

Instrument manufacturer Shenzhen Hangchuang Medical Equipment Co., Ltd. confirms the following regarding after-sales service:

1 Installation, warranty time and scope, repair response time, etc.:

1Equipment installation and debugging time: We should start from the date of receiving notification from the userthree daysInstall, inspect, and debug the equipment at the end user's location until the technical specifications of the product meet the contract requirements.

2Equipment warranty period: One year warranty for the host;

3Repair response time:After receiving a notification from the user requesting maintenance of the purchased instrument and equipment, twoReply within hours;And dispatch qualified maintenance engineers24Within hours, arrive at the user's site for maintenance;

4Component guarantee supply time:24Hour;

II Maintenance fee standard:

1All repairs and technical services during the warranty period are completely free of charge; Outside the warranty period, lifelong maintenance is required, and only cost fees will be charged for replacing spare parts;

2Whether within or outside the warranty period, software upgrades are completely free of charge;

III Operation and maintenance training:

1The training content shall be in accordance with the equipment manualProgram execution;

2The training will be conducted immediately after the equipment installation is completed or at the user's time; The training location is the place where the equipment is installed and used; The number of trainees can be coordinated；

3Training objective: Until the user becomes proficient in daily operations and maintenance;