Napo tropical brick insulation layer muffle furnace, temperature 1300 ℃

The heating element of the muffle furnace with Naboo tropical brick insulation layer is installed on the support tube and can freely radiate heat in the furnace, so the heating time required for the muffle furnace is extremely short. The sturdy insulation structure is composed of lightweight refractory bricks, which can achieve a working temperature of 1300 ℃ for the equipment. If the working temperature needs to be increased, this type of muffle furnace can replace the commonly used L (T)../12 furnace type.

standard specifications

Temperature 1300 ° C

Double sided heating

The heating element installed on the support tube radiates heat freely and has a long service life

The furnace chamber has a sturdy multi-layer lightweight refractory brick insulation structure

Double layered striped stainless steel furnace shell and additional cooling device ensure very low shell temperature

The furnace door can be optionally equipped with an external opening furnace door (L) (for workpiece placement) or an upward opening furnace door (LT) (with the hot surface facing away from the operator) for free

There is an adjustable air inlet on the furnace door

There is an exhaust port on the back wall of the furnace

Controller B510 (5 programs, each with 4 program segments)

Low noise during heating operation, equipped with solid-state relay

Please follow the operation manual for specific applications

The basic function of NTLog for Nabore controllers is to record process data using a USB flash drive

additional configuration

Exhaust chimney, equipped with exhaust fan or catalyst

Equipped with an adjustable cut-off temperature over temperature limiter, serving as a temperature limiter to protect the oven and loading materials

The protective gas interface required for blowing the electric furnace with non flammable protective gas or reactive gas (cannot be used in combination with exhaust chimneys, exhaust chimneys with fans, or catalysts) is not airtight

Manual or automatic gas distribution system

The thermocouple hole is located on the back wall or on the furnace door

Process control and recording through VCD software package for monitoring, recording, and control