Nabertherm Nabertherm muffle furnace: temperature 1100 ℃ or 1200 ℃

The Nabore muffle furnace L3/11-LT60/12 series muffle furnace is suitable for daily laboratory applications and has won wide recognition over the years. The outstanding roasting effect, modern exterior design, and high reliability are the prominent features of this type of muffle furnace. You can choose external or upward opening furnace doors for free for the muffle furnace.

standard specifications

Temperature 1100 ° C or 1200 ° C

Provide temperature uniformity through double-sided heating with ceramic heating plates (L 24/11-LT 60/12 muffle furnace can be heated on three sides)

When the temperature is above 800 and the air intake valve is closed, according to DIN 17052-1, the temperature uniformity in the working space of an empty furnace is+/-5 K

N-type (1100) or S-type (1200) thermocouple

Ceramic heating plate with embedded heating wire, easy to maintain and replace

Using unclassified insulation materials, in accordance with EC Regulation No 1272/2008 (CLP)

Double layered striped stainless steel furnace shell and additional cooling device ensure very low shell temperature

The furnace door can be optionally equipped with an external opening furnace door (L) (for workpiece placement) or an upward opening furnace door (LT) (with the hot surface facing away from the operator) for free

There is an adjustable air inlet on the furnace door (see diagram)

There is an exhaust port on the back wall of the furnace

Controller B510 (5 programs, each with 4 program segments) or R7 is used for L1/12

Low noise during heating operation, equipped with solid-state relay

Please follow the operation manual for specific applications

The basic function of NTLog for Nabore controllers is to record process data using a USB flash drive

additional configuration

Exhaust chimney, equipped with exhaust fan or catalyst (not applicable to L 1 and L 15)

Equipped with an adjustable cut-off temperature over temperature limiter, serving as a temperature limiter to protect the oven and loading materials

The protective gas interface required for blowing the electric furnace with non flammable protective gas or reactive gas (cannot be used in combination with exhaust chimneys, exhaust chimneys with fans, or catalysts) is not airtight

Manual or automatic gas distribution system

The thermocouple hole is located on the back wall or on the furnace door

Other accessories included

Process control and recording through VCD software package for monitoring, recording, and control

A loading rack equipped with enclosed or perforated trays, used for loading in two layers, including brackets for insertable/removable trays, with a temperature of 800 ° C. L (T) 9/11 has a loading weight of 2 kilograms per layer, and L (T) 15/11 has a loading weight of 3 kilograms per layer