Multi functional cable identification device

NegotiableUpdate on 05/14

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The KD180D multifunctional cable identification device is a high-performance cable identification device consisting of a signal transmitter and a receiver, designed to accurately identify target cables among numerous cables. This device is suitable for both live and non live cables, but the use of live cables is limited to three core armored cables. It has high recognition accuracy and easy operation.

Product Details

KD180Dmulti-functionalCable identification device，also known asCable identification device, live cable identification device, intelligent cable identification deviceisforPower cable engineer and cable workersolveCable Identificationtechnical issueAnd designed. The user accurately identifies one of the target cables from multiple cables through the instrument,Prevent serious accidents caused by accidentally sawing live cables. Cable identification starts from the operation at both ends of the cable, and it is necessary to ensure the accuracy of the double numbering at both ends of the cable. This instrument design adoptsPSK technology combined with precise algorithms. No matter how reliable the memory of on-site staff is, it cannot replace the recognition of professional instruments. This product also has identification for live cables、Power outage cable identification, AC current testing, AC voltage testing functions,fromlaunchmachine、Transmitting current clamp, receivingmachine、receiveFlexible current clampWaiting for composition.

transmitterDuring the identification of live cables and power outage cables, signals are transmitted to the target cable, and a high performance rechargeable lithium battery is built-in,The transmitter adopts an integrated specialized toolbox design, usingpolypropylenePlastic is used as raw material and new composite fillers are added for one-time injection moldingThe box has low density, strength, stiffness, hardness, wear resistance, heat resistance, and insulation performance, and can withstand approximately200kg pressure, large LCD hostreal-timedisplayRemaining battery power，whiteBacklightDynamic transmission signalInstructions, clear at a glance.

Launch pliersWhen identifying live cables, the transmitting clamp couples the signal emitted by the transmitter to the target cable, with clamp sizeΦ120mmThe transmission clamp has directionality, and the transmission signal flows in the direction indicated by the arrow on the transmission clamp.

During live recognitionUsing the principle of pulse current and four emission frequencies625Hz、1562Hz、2500Hz、10kHz， By coupling the transmission clamp to the target cable and injecting a composite pulse current signal into the cable core, the pulse current generates an electromagnetic field around the target cable for detection and identification by the receiver and flexible current clamp; Due to the directional nature of pulse current, detection also has directionality.

When identifying power outagesUsing the principle of pulse current, inject a pulse encoded current signal into the cable core, which generates an electromagnetic field around the target cable for the receiver and flexible current clamp to detect, decode, and identify; Due to the directionality of current, detection also has directionality.

receivemachineFor handheld devices,3.5-inch color LCD screen, Built inHigh speed microprocessors,Combining precise algorithms to identify and decode the pulse encoded current signal of the transmitter, while also having signal strength calibration function, displaying signal strength and detection results in a beautiful and intuitive way; Dynamic display of color scale bar, clear at a glance, successful cable identification and printing√, mark X for non target cables,canQuick automaticIdentify the target cableAt the same time, the voltage range that can be tested isAC 0.00V～600V(50Hz/60Hz)The measurable range of AC current isAC 0.00A~5000A(50Hz/60Hz), measurable current frequency45Hz～70Hz.

flexiblecurrent clamp：forRoche coilHas transient tracking capability,Can quickly identify the pulse encoded current generated by the transmitter, suitable for thick cablesOr irregularly shaped conductors. The inner diameter of its jaws isabout200mm， Can clampΦ200Cables below mm,No need to disconnect the tested objectlineroadNon contact measurement,safetyfast.

Special Notice:thisThe cable identification device also hasIdentification of live cables and power outage cables. When identifying power outage cables, it is strictly prohibited to connect them to live cables.When identifying, the transmitting clamp and receiving clamp cannot be mixed, and the input signal direction must be consistent.

KD180Dmulti-functionalCable identification deviceTechnical Specifications

1. Benchmark conditions and working conditions

Influence quantity	Benchmark conditions	working conditions	remark
ambient temperature	23℃±1℃	-10℃～40℃	/
Environmental Dampness Crossing	40%～60%	＜80%	/
Tested voltage, current frequency	50Hz±1Hz	45Hz～70Hz	When testing voltage and current
Receiver operating voltage	7.4V±0.5V	7.4V±1V	/
Operating voltage of transmitter	11.1V±0.5V	11.1V±1.5V	/
External electric and magnetic fields	should be avoided
Location of the tested cable	When testing the current, the tested cable is located at the approximate geometric center of the flexible coil

2. Transmitter specifications

Function	Transmit composite pulse frequency current signal, display remaining battery voltage, and dynamically indicate transmission status
Power supply	11.1V large capacity rechargeable lithium battery, can work continuously for about 8 hours when fully charged
display mode	Large LCD real-time display of remaining battery voltage
transmission frequency	625Hz, 1562Hz, 2500Hz, 10KHz (during live recognition), adjust the transmission frequency by pressing the up and down arrow keys
pulse voltage	500V (during power outage identification)
pulse current	maximum5A(Depending on the size of the circuit resistance)
pulse frequency	Once per second
pulse width	2ms
Launch caliper inner diameter	φ120mm
Test line length	3 meters, with crocodile clip, 1 red and 1 black clip each
Launch clamp lead length	2m
Grounding pin size	Length, width and thickness 225mm×100mm×10mm
Transmitter size	320mm×275mm×145mm
Launch clamp size	Length, width, and thickness 300mm×175mm×50mm
LCD size	128mm×75mm
LCD display domain	124mm×67mm
outer packaging dimensions	Length, width, and height: 400mm × 245mm × 335mm
backlight control	Yes, white backlight
Operating Temperature	-10℃～40℃
Storage conditions	-20℃~50℃，≤95％RHNo condensation
Instrument quality	Transmitter: 2.5kg
	Launch clamp: 1.08kg
	Total weight: 4.4kg (including receiver)
battery level	When the battery voltage is below 9.65V, the low battery voltage symbol is displayed, reminding to charge the battery; When the voltage drops below 9.5V, the device automatically shuts down
Charger	12.6V DC charger
charging port	Circular charging interface, DC identification
Stress resistance	The transmitter adopts an integrated specialized toolbox design, and the box can withstand a pressure of about 200kg
Voltage resistance	AC 3700V/rms (before the top and bottom of the instrument box)
electromagnetic properties	IEC61326(EMC)
Refer to safety regulations	IEC61010-1 (CAT III 300V, CAT IV 150V, Pollution Level 2)

3. Reception

merit can	Cable identification (identifying and decoding pulse current signals); Measurement of AC voltage, current, and frequency
electricity source	7.4V large capacity rechargeable lithium battery, USB charging interface, can work continuously for about 6 hours when fully charged
rated current	about300mA max
display mode	3.5-inch true color LCD screen display, color icon indication
Signal calibration	Yes, the percentage of received and transmitted signals has reached the calibration valueMore than 60% is one of the conditions for successful recognition. After calibration, the test frequency and signal amplification cannot be changed, otherwise recalibration is required
Direction recognition	Yes, the direction of the transmitting clamp, receiving clamp, and loading signal must be consistent, which is one of the conditions for successful recognition
Cable identification successful	Green checkmark icon indicates（√）
Non target cable	Red orange cross icon indication（×）
Receiver size	length, width, thickness207mm×101mm×45mm
Flexible coil	long contract630mm， Wire diameter 6mm or 12.5mm
Inner diameter of coil	φ200mm
lead length	Flexible coil lead length:2m
Voltage testing line	long1m (1 red and 1 black)
Testing Scope	Power outage identification: The coil can detect the circuit resistancePulse signals ranging from 0 Ω to 10k Ω; When the resistance of the detection circuit is 10k Ω, it is necessary to ensure that the battery level of the transmitter is above 11V
Testing Scope	Live recognition: The coil can detect the circuit resistancePulse signals ranging from 0 Ω to 100 Ω; When the resistance of the detection circuit is 100 Ω, it is necessary to ensure that the battery level of the transmitter is above 11V
quantity Cheng	AC voltage: 0.01V～600V(50Hz/60Hz)
	alternating current 0.01A～5000A(50Hz/60Hz)
	Current frequency: 45Hz~70Hz
essence degree	AC voltage:±2%±1dgt
	alternating current±2%±1dgt
	Current frequency:±2%±1dgt
signal recognition	Color scale bar and digital display signal strength
Detection rate	aboutOnce per second
gain adjustment	In the testing interface, pressLeft and right arrowsKey adjustment signal amplification factor
backlight control	In the menu interface, pressup and down arrowsThe keys can be adjustedLCD backlight brightness
Auto Shutdown	Start up approximatelyAfter 30 minutes, the instrument panel will automatically shut down to reduce battery consumption
battery voltage	When the battery voltage is lower thanAt 6.5V, the low battery voltage symbol is displayed, reminding to charge the battery
charge electricity device	9V DC charger
charging port	USB charging port
Working temperature and humidity	-10℃～40℃； Below 80% Rh
Storage temperature and humidity	-10℃~50℃，≤95％RHNo condensation
Receiver quality	Receiver:370g(with battery)
Receiver quality	Flexible current clamp:172g
cease fate	Between the instrument circuit and the protective casing≥100MΩ
Suitable for safety regulations	IEC61010-1 CAT III 600V, IEC61010-031, IEC61326, Pollution Level 2

KD180Dmulti-functionalCable identification deviceconfiguration

transmitter	1 unit
receiver	1 unit
toolkit	1 piece
Emission current clamp	1 piece
Receive flexible current clamp	1 piece
Crocodile clip testing line	2 (1 red and 1 black)
Pen test line	2 (1 red and 1 black)
Grounding pin	2 pieces
9VUSB charger、charging cable	1 set (for receiver)
12.6V charger	1 (for transmitter)
7.4V lithium battery	1 group (inside the receiver)
11.1V lithium battery	1 group (inside the transmitter)
Instruction manual, warranty card, certificate of conformity	1 copy