Cable identification device

NegotiableUpdate on 05/14

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The KD180 cable identification device is a high-performance cable identification device consisting of a signal transmitter and a receiver, designed to accurately identify target cables among numerous cables. This device is suitable for both live and non live cables, but the use of live cables is limited to three core armored cables. It has high recognition accuracy and easy operation.

Product Details

KD180Cable identification deviceisforPower cable engineer and cable workersolveCable Identificationtechnical issueAnd designed. The user accurately identifies one of the target cables from multiple cables through the instrument,Prevent serious accidents caused by accidentally sawing live cables. Cable identification starts from the operation at both ends of the cable, and it is necessary to ensure the accuracy of the double numbering at both ends of the cable. This instrument design adopts PSK technology. No matter how reliable the memory of on-site staff is, it cannot replace the recognition of professional instruments. This product is only suitable for on-site identification of cables that have been powered off. It is strictly prohibited to use itthisCable identification deviceConnect the running power cable!This instrument is composed oflaunchmachine，receivemachine，Flexible current clampWaiting for composition.

transmitterUsing the principle of pulse current, inject a pulse encoded current signal into the cable core, which generates an electromagnetic field around the target cable for the receiver and flexible current clamp to detect, decode, and identify; Due to the directionality of current, detection also has directionality.The transmitter adopts an integrated specialized toolbox design, usingpolypropylenePlastic is used as raw material and new composite fillers are added for one-time injection moldingIt has low density, strength, stiffness, hardness, wear resistance, heat resistance, and insulation performance, and its box can withstand about200kg pressure, large LCD hostreal-timedisplayRemaining battery power，whiteBacklightDynamic transmission signalInstructions, clear at a glance.

receivemachineFor handheld devices,3.5-inch color LCD screen, Built inHigh speed microprocessors,Identify and decode the pulse encoded current signal of the transmitter. Electronic dial indicates signal strength, exquisite and intuitive; Color grating dynamic display, clear at a glance,canQuick automaticIdentify the target cableSimultaneously possessingAC voltage detection function,The range isAC 0.01V～600V(50Hz/60Hz).

flexiblecurrent clampforRoche coilHas transient tracking capability,Can quickly identify the pulse encoded current generated by the transmitter, suitable for thick cablesOr irregularly shaped conductors. The inner diameter of its jaws isabout200mm， Can clampΦ200Cables below mm,No need to disconnect the tested objectlineroadNon contact measurement,safetyfast.

Special Notice:thisCable identification deviceOnly applicable to cables with power outages as the target cable. Please confirm that the target cable belongs to this range before use, that is, it is not electrically recognized.When identifying, both the transmitter and handheld receiver of this instrument need to be used simultaneously.

1. Benchmark conditions and working conditions

Influence quantity	Benchmark conditions	working conditions	remark
ambient temperature	23℃±1℃	-10℃～40℃	/
Environmental Dampness Crossing	40%～60%	＜80%	/
Tested voltage frequency	50Hz±1Hz	45Hz～70Hz	/
Receiver operating voltage	7.4V±0.5V	7.4V±1V	/
Operating voltage of transmitter	11.1V±0.5V	11.1V±1.5V	/
External electric and magnetic fields	should be avoided
Location of the tested cable	The tested cable is located at the approximate geometric center of the flexible coil

2. Transmitter specifications

merit can	Generate pulse encoded current signals; Display remaining battery voltage
electricity source	11.1V large capacity rechargeable lithium battery, can work continuously for about 8 hours when fully chargedhour
display mode	extra largeReal time display of remaining battery voltage on LCD
pulse voltage	500V
pulse current	maximum30A(Depending on the size of the circuit resistance)
pulse frequency	Once per second
pulse width	2ms
transmit signal	Bar chart dynamically displays the emission signal
Test line length	3 meters, with crocodile clip, 1 red and 1 black clip each
Operating Temperature	-10℃～40℃
Storage conditions	-20℃~50℃，≤95％RHNo condensation
backlight control	Yes, white backlight
ruler inch	320mm×275mm×145mm
LCD size	128mm×75mm
LCD display domain	124mm×67mm
Instrument quality	Transmitter:2.5kg
Instrument quality	Total mass:3.3 kg (including receiver)
outer packaging dimensions	length, width, height400mm×245mm×335mm
battery level	When the battery voltage is lower than9.65VWhen the battery voltage is low, the symbol is displayed to remind to charge the battery; belowAt 9.5V, the device automatically shuts down
charge electricity device	12.6V DC charger
charging port	Circular charging interface,DC identification
resist press	The transmitter adopts an integrated specialized toolbox design, and the box can withstand about200kg pressure
endure press	AC 3700V/rms (before the top and bottom of the instrument box)
electromagnetic properties	IEC61326(EMC)
Refer to safety regulations	IEC61010-1 (CAT III 300V, CAT IV 150V, Pollution Level 2)

3. Receiver specifications

merit can	Cable identification (identifying and decoding pulse current signals); AC voltage measurement
electricity source	7.4V large capacity rechargeable lithium battery, USB charging interface, can work continuously for about 8 hours when fully chargedhour
rated current	about180mA max
display mode	3.5-inch true color LCD screen display, color electronic dial indicator
Cable identification successful	Green grating clockwise dynamic indication
Non target cable	Red orange grating counterclockwise dynamic indication
How many sizes are received	length, width, thickness207mm×101mm×45mm
Flexible coil	long contract630mm， Wire diameter 6mm or 12.5mm
Inner diameter of coil	φ200mm
lead length	Flexible coil lead length:2m
Voltage testing line	long1m (1 red and 1 black)
Testing Scope	The detectable loop resistance of the coil is0Ω～2k Ω pulse signal; When the resistance of the detection circuit is 2k Ω, it is necessary to ensure that the battery level of the transmitter is above 10V
Voltage range	AC 0.01V～600V(50Hz/60Hz)
voltage accuracy	±1%±1dgt
signal recognition	Color grating dynamic display signal intensity
Detection rate	aboutOnce per second
gain adjustment	Level 6,pressLeft and right arrowsThe key adjusts the signal amplification factor, and the pointer is best placed between the middle and two-thirds of the electronic dial
backlight control	pressup and down arrowsThe keys can be adjustedLCD backlight brightness
Auto Shutdown	Start up approximatelyAfter 15 minutes, the instrument panel will automatically shut down to reduce battery consumption
battery voltage	When the battery voltage is lower than6.5VWhen the low battery voltage symbol is displayed, it reminds to charge the battery
charge electricity device	9V DC charger
charging port	USB charging port
Working temperature and humidity	-10℃～40℃； Below 80% Rh
Storage temperature and humidity	-10℃~50℃，≤95％RHNo condensation
Receiver quality	Receiver:370g(with battery)
Receiver quality	current clamp172g
cease fate	Between the instrument circuit and the protective casing≥100MΩ
Suitable for safety regulations	IEC61010-1 CAT III 600V, IEC61010-031, IEC61326, Pollution Level 2