Multi functional abrasive particle analyzer

NegotiableUpdate on 05/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

LN-2 Multi functional Grinding Particle Analyzer $r $n. Introduction: The working principle of the $r $n Multi functional Grinding Particle Analyzer follows the ASTM D7596 standard, and its core is based on direct imaging technology and artificial intelligence recognition technology. The workflow is mainly divided into two parts: hardware imaging and software analysis. In terms of hardware, the core module of the instrument includes a laser light source, a 4x amplifier, a sample cell, and a CCD detector. During analysis, the oil sample flows through the sample pool and is irradiated with pulsed laser on the particles. The generated signal is amplified by a 4x amplifier and projected onto a high-resolution CCD detector for imaging, directly capturing the morphology and projection of each solid particle.

Product Details

LN- 2Multi functional abrasive particle analyzer

OneIntroduction:

Multi functional abrasive particle analyzerWorking principle followsASTM D7596The core of the standard is based on direct imaging technology and artificial intelligence recognition technology. The workflow is mainly divided into two parts: hardware imaging and software analysis. In terms of hardware, the core module of the instrument includes a laser light source4Amplifier, sample pool, andCCDDetector. During analysis, the oil sample flows through the sample pool, and the particles are irradiated with pulsed laser, generating a signal that passes through the sample pool4After amplification by a multiplier amplifier, project to high resolutionCCDImaging on the detector directly captures the morphology, contour, and projected area of each solid particle. The software part includes built-in expert systems or artificial neural network algorithmsCCDThe captured particle images are automatically recognized, counted, and classified. Intelligent abrasive recognition technology can automatically classify wear particles into metal abrasive particles such as cutting wear, contact (sliding) wear, fatigue wear, as well as non-metallic abrasive particles, fibers, bubbles, water droplets, and other types. Thus, multifunctional integrated analysis can be achieved, including analysis of equipment wear causes (intelligent ferrography), determination of oil contamination (particle counting and cleanliness code), and detection of ferromagnetic particle concentration.

2、 Main technical parameters:

1.Test content: Concentration of ferromagnetic particles in lubricating oil and greaseppm(ug/kg)

2.Detection range:HD-TL200:0~2000ppm; HD-TL200+:0~20%(0~200000ppm)

3.Sensitivity:1ppm@0-200oppm ; 5ppm@2000 ~200000ppm0-500ppm<2%or5ppmChoose the greater of the two

4.Applicable fluids: lubricating grease, gear oil, transmission oil, engine oil, compressor oil, hydraulic oil, etc

5.Repeatability:500~2000ppm<1%or10ppmChoose the greater of the two2000~200000ppm<0.8%

6.Testing time:<10s

7.Sample dosage:5ml

8.Particle response: from nanometer to millimeter level(ESDequivalent diameter)

9.Calibration Attachment: Accompanying Calibration Samples3only 多功能磨粒分析仪

10.Other attachments:5mltest tube50only

11.Display interface:7”Touch screen

12.Data storage:2000Inspection record

13.Working power supply:AC220V,1A

14.Operating Temperature10~45°C

15.Working humidity:10~90%RH, without condensation

16.Storage temperature:20~70°C

17.Compliant with standards:ASTM D7596